DS692 Datasheet, PDF (1/41 Pages) Xilinx, Inc – Radiation-Hardened

DS692 (v1.3.1) January 16, 2015
Radiation-Hardened, Space-Grade
Virtex-5QV FPGA Data Sheet:
DC and AC Switching Characteristics
0
0
Product Specification
Virtex-5QV FPGA Electrical Characteristics
Radiation-hardened Virtex®-5QV FPGAs are available in
the -1 speed grade only. Virtex-5QV FPGA DC and AC
characteristics are specified for military temperatures.
All supply voltage and junction temperature specifications
are representative of worst-case conditions. The
parameters included are common to popular designs and
typical conditions.
This Virtex-5QV FPGA data sheet, part of an overall set of
documentation on the Virtex-5 family of FPGAs, is available
on the Xilinx website:
• DS192, Radiation-Hardened, Space-Grade
Virtex-5QV Device Overview
• UG520, Virtex-5QV FPGA Packaging and Pinout
Specification
• UG190, Virtex-5 FPGA User Guide
• UG191, Virtex-5 FPGA Configuration Guide
• UG193, Virtex-5 FPGA XtremeDSP™ Design
• UG198, Virtex-5 FPGA RocketIO™ GTX Transceiver
User Guide
• UG194, Virtex-5 FPGA Tri-Mode Ethernet Media
Access Controller User Guide
• UG197, Virtex-5 FPGA Integrated Endpoint Block User
Guide for PCI Express® Designs
• UG203, Virtex-5 FPGA PCB Designer’s Guide
Virtex-5QV FPGA DC Characteristics
Table 1: Absolute Maximum Ratings
Symbol
Description
Value
Units
V_CCINT
V_CCAUX
V_CCO
V_BATT
V_REF
V_IN
I_IN
Internal supply voltage relative to GND
Auxiliary supply voltage relative to GND
Output drivers supply voltage relative to GND
Key memory battery backup supply
Input reference voltage
3.3V I/O input voltage relative to GND⁽²⁾ (user and dedicated I/Os)
2.5V or below I/O input voltage relative to GND (user and dedicated I/Os)
Current applied to an I/O pin, powered or unpowered
Total current applied to all I/O pins, powered or unpowered
–0.5 to 1.1
V
–0.5 to 3.0
V
–0.5 to 3.75
V
–0.5 to 4.05
V
–0.5 to 3.75
V
–0.75 to 4.05
V
–0.75 to V_CCO + 0.5
V
±100
mA
±100
mA
V_TS
T_STG
T_SOL
Voltage applied to 3-state 3.3V output⁽²⁾ (user and dedicated I/Os)
Voltage applied to 3-state 2.5V or below output (user and dedicated I/Os)
Storage temperature (ambient)
Maximum soldering temperature⁽³⁾
–0.75 to 4.05
V
–0.75 to V_CCO + 0.5
V
–65 to 150
°C
+220
°C
Notes:
1. Stresses beyond those listed under Absolute Maximum Ratings might cause permanent damage to the device. These are stress ratings only,
and functional operation of the device at these or any other conditions beyond those listed under Operating Conditions is not implied.
Exposure to Absolute Maximum Ratings conditions for extended periods of time might affect device reliability.
2. For 3.3V I/O operation, refer to UG190: Virtex-5 FPGA User Guide, Chapter 6, 3.3V I/O Design Guidelines.
3. For thermal considerations, refer to UG520: Virtex-5QV FPGA Packaging and Pinout Specification.
4. 3.3V I/O absolute maximum limit applied to DC and AC signals.
© Copyright 2010–2015 Xilinx, Inc. XILINX, the Xilinx logo, Virtex, Zynq, Kintex, Artix, Spartan, ISE, Vivado and other designated brands included herein are trademarks of Xilinx
in the United States and other countries. PCI, PCI Express, PCIe, and PCI-X are trademarks of PCI-SIG. All other trademarks are the property of their respective owners.
DS692 (v1.3.1) January 16, 2015
Product Specification
www.xilinx.com
Send Feedback
1