DS90UH947-Q1 Datasheet, PDF (62/87 Pages) Texas Instruments – 1080p OpenLDI to FPD-Link III Serializer with HDCP

DS90UH947-Q1
SNLS455 – NOVEMBER 2014
ADD
(dec)
122
ADD
(hex)
0x7A
Register Name
Slave Alias[4]
123
0x7B Slave Alias[5]
124
0x7C Slave Alias[6]
125
0x7D Slave Alias[7]
128
0x80 RX_BKSV0
129
0x81 RX_BKSV1
130
0x82 RX_BKSV2
131
0x83 RX_BKSV3
132
0x84 RX_BKSV4
144
0x90 TX_KSV0
145
0x91 TX_KSV1
146
0x92 TX_KSV2
147
0x93 TX_KSV3
148
0x94 TX_KSV4
www.ti.com
Table 10. Serial Control Bus Registers (continued)
Bit(s)
7:1
0
7:1
0
7:1
0
7:1
0
7:0
7:0
7:0
7:0
7:0
7:0
7:0
7:0
7:0
7:0
Register
Type
RW
RW
RW
RW
R
R
R
R
R
R
R
R
R
R
Default
(hex)
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
Function
Description
Slave Alias ID 4
Port0/Port1
Slave Alias ID 5
Port0/Port1
Slave Alias ID 6
Port0/Port1
Slave Alias ID 7
Port0/Port1
BKSV0
BKSV1
BKSV2
BKSV3
BKSV4
TX_KSV0
TX_KSV1
TX_KSV2
TX_KSV3
TX_KSV4
7-bit Slave Alias ID of the remote Slave 4 attached to the remote
Deserializer. The transaction will be remapped to the address
specified in the Slave ID 4 register. A value of 0 in this field disables
access to the remote Slave 4.
If Port1_SEL is set, this register controls Port1 operation.
Reserved.
7-bit Slave Alias ID of the remote Slave 5 attached to the remote
Deserializer. The transaction will be remapped to the address
specified in the Slave ID 5 register. A value of 0 in this field disables
access to the remote Slave 5.
If Port1_SEL is set, this register controls Port1 operation.
Reserved.
7-bit Slave Alias ID of the remote Slave 6 attached to the remote
Deserializer. The transaction will be remapped to the address
specified in the Slave ID 6 register. A value of 0 in this field disables
access to the remote Slave 6.
If Port1_SEL is set, this register controls Port1 operation.
Reserved.
7-bit Slave Alias ID of the remote Slave 7 attached to the remote
Deserializer. The transaction will be remapped to the address
specified in the Slave ID 7 register. A value of 0 in this field disables
access to the remote Slave 7.
If Port1_SEL is set, this register controls Port1 operation.
Reserved.
BKSV0: Value of byte0 of the Receiver KSV.
BKSV1: Value of byte1 of the Receiver KSV.
BKSV2: Value of byte2 of the Receiver KSV.
BKSV3: Value of byte3 of the Receiver KSV.
BKSV4: Value of byte4 of the Receiver KSV.
TX_KSV0: Value of byte0 of the Transmitter KSV.
TX_KSV1: Value of byte1 of the Transmitter KSV.
TX_KSV2: Value of byte2 of the Transmitter KSV.
TX_KSV3: Value of byte3 of the Transmitter KSV.
TX_KSV4: Value of byte4 of the Transmitter KSV.
62
Submit Documentation Feedback
Product Folder Links: DS90UH947-Q1
Copyright © 2014, Texas Instruments Incorporated