English
Language : 

DS90UH947-Q1 Datasheet, PDF (43/87 Pages) Texas Instruments – 1080p OpenLDI to FPD-Link III Serializer with HDCP
www.ti.com
ADD
(dec)
15
ADD
(hex)
0x0F
Register Name
GPIO3 Configuration
(If PORT1_SEL is set,
this register controls
the D_GPIO3 pin)
16
0x10 GPIO5_REG and
GPIO6_REG
Configuration
DS90UH947-Q1
SNLS455 – NOVEMBER 2014
Table 10. Serial Control Bus Registers (continued)
Bit(s)
7:4
3
2:0
7
6
5:4
3
2
1:0
Register
Type
RW
RW
RW
RW
RW
RW
Default
(hex)
0x00
0x00
Function
GPIO3 Output
Value
GPIO3 Mode
GPIO6_REG
Output Value
GPIO6_REG
Mode
GPIO5_REG
Output Value
GPIO5_REG
Mode
Description
Reserved.
Local GPIO Output Value. This value is output on the GPIO pin when
the GPIO function is enabled, the local GPIO direction is set to output,
and remote GPIO control is disabled.
0: Output LOW (default).
1: Output HIGH.
Determines operating mode for the GPIO pin:
x00: Functional input mode.
x10: TRI-STATE.
001: GPIO mode, output.
011: GPIO mode, input.
101: Remote-hold mode. The GPIO pin will be an output, and the
value is received from the remote Deserializer. In remote-hold mode,
data is maintained on link loss.
111: Remote-default mode. The GPIO pin will be an output, and the
value is received from the remote Deserializer. In remote-default
mode, GPIO's Output Value bit is output on link loss.
Local GPIO Output Value. This value is output on the GPIO pin when
the GPIO function is enabled and the local GPIO direction is set to
output.
0: Output LOW (default).
1: Output HIGH.
Reserved.
Determines operating mode for the GPIO pin:
00: Functional input mode.
10: TRI-STATE.
01: GPIO mode, output.
11: GPIO mode; input.
Local GPIO Output Value. This value is output on the GPIO pin when
the GPIO function is enabled and the local GPIO direction is set to
output.
0: Output LOW (default).
1: Output HIGH.
Reserved.
Determines operating mode for the GPIO pin:
00: Functional input mode.
10: TRI-STATE.
01: GPIO mode, output.
11: GPIO mode; input.
Copyright © 2014, Texas Instruments Incorporated
Product Folder Links: DS90UH947-Q1
Submit Documentation Feedback
43