SI5325C-C-GM Datasheet, PDF (39/178 Pages) Silicon Laboratories – ANY-FREQUENCY PRECISION CLOCKS

Si53xx-RM
5.1.2. Clock Multiplication (Si5322, Si5323, Si5365, Si5366)
These parts provide flexible frequency plans for SONET, DATACOM, and interworking between the two (Table 7,
Table 8, and Table 9 respectively). The CKINn inputs must be the same frequency as specified in the tables. The
outputs are the same frequency; however, in the Si5365 and Si5366, CKOUT3 and CKOUT4 can be further divided
down by using the DIV34 [1:0] pins.
The following notes apply to Tables 7, 8, and 9:
1. All entries are available for the Si5323 and Si5366. Only those marked entries under the WB column are
available for the Si5322 and Si5365.
2. The listed output frequencies appear on CKOUTn. For the Si5365 and Si5366, sub-multiples are available on
CKOUT3 and CKOUT4 using the DIV34[1:0] control pins.
3. All ratios are exact, but the frequency values are rounded.
4. For bandwidth settings, f3 values, and frequency operating ranges, consult DSPLLsim.
5. For the Si5366 with CK_CONF = 1, CKIN3 and CKIN4 are the same frequency as FS_OUT.
Table 7. SONET Clock Multiplication Settings (FRQTBL=L)
No FRQSEL
[3:0]
0
LLLL
1
LLLM
2
LLLH
3
LLML
4 LLMM
5
LLMH
6
LLHL
f_IN MHz
Mult Factor
Nominal
f_OUT MHz
0.008
1
2430
4860
9720
19440
38880
77760
0.008
19.44
38.88
77.76
155.52
311.04
622.08
All Devices
f_CKOUT5 (MHz)
(CK_CONF = 0)
0.008
19.44
38.88
77.76
155.52
311.04
622.08
Si5366 Only
FS_OUT (MHz)
(CK_CONF = 1)
0.008
0.008
0.008
0.008
0.008
0.008
0.008
Rev. 1.2
39