SI5325C-C-GM Datasheet, PDF (20/178 Pages) Silicon Laboratories – ANY-FREQUENCY PRECISION CLOCKS

Si53xx-RM
3.5. Si5324
The Si5324 is a jitter-attenuating precision clock multiplier for applications requiring sub 1 ps jitter performance.
The Si5324 accepts dual clock inputs ranging from 2 kHz to 710 MHz and generates two independent,
synchronous clock outputs ranging from 2 kHz to 945 MHz and select frequencies to 1.4 GHz. The device provides
virtually any frequency translation combination across this operating range. The Si5324 input clock frequency and
clock multiplication ratios are programmable through an I²C or SPI interface. The DSPLL loop bandwidth is digitally
programmable, providing jitter performance optimization at the application level. The Si5324 features loop
bandwidth values as low as 4 Hz. Operating from a single 1.8, 2.5, or 3.3 V supply, the Si5324 is ideal for providing
clock multiplication and jitter attenuation in high-performance timing applications. See "6. Microprocessor
Controlled Parts (Si5319, Si5324, Si5325, Si5326, Si5327, Si5328, Si5367, Si5368, Si5369, Si5374, Si5375, and
Si5376)" on page 63 for a complete description.
CKIN_1 + ²
CKIN_1 –
CKIN_2 + ²
CKIN_2 –
÷ N31
÷ N32
0
1
0 _f3
1
INT_C1B
C2B
Signal
Detect
LOL
CS_CA
CMODE
SDA_SDO
SCL
SDI
A[2]/SS
A[1:0]
INC
DEC
RST
Control
Xtal or Refclock
RATE[1:0]
XB
XA
3
DSPLL
BYPASS
DSPLL^®
÷ N2
fOSC
÷ NC1
1
0
÷ N1_HS
1
÷ NC2 ₀
2
/
CKOUT_1 +
CKOUT_1 –
2
CKOUT_2 +
CKOUT_2 –
VDD
GND
Figure 5. Si5324 Clock Multiplier and Jitter Attenuator Block Diagram
20
Rev. 1.2