K4C89363AF Datasheet, PDF (56/58 Pages) Samsung semiconductor – 2,097,152-WORDS x 4 BANKS x 36-BITS DOUBLE DATA RATE Network-DRAM

K4C89363AF
Extended Mode Register Fields
(E-1) DLL Switch field (A0)
This bit is used to enable DLL. When the A0 bit is set "0", DLL is enabled.
(E-2) Output Driver Impedance Control field (A1 to A4)
This field is used to choose Output Driver Strength. Four types of Driver Strength are supported. QS and DQ Driver
Strength can be chosen separately. A2-A1 specified the DQ Driver Strength. A4-A3 specified the QS Driver Strength.
QS
A4
A3
0
0
0
1
1
0
1
1
DQ
A2
A1
0
0
0
1
1
0
1
1
Output Driver Impedance Control
Normal Output Driver
Strong Output Driver
Weaker Output Driver
Reserved
(E-3) Strobe Select (A6/A5)
Two types of strobe are supported. This field is used to choose the type of data strobe.
(1) Unidirectional DS/QS mode
Data strobe is separated DS for write strobe and QS for read strobe.
DS is used to sample write data at write operation. QS is aligned with read data at Read operation.
(2) Unidirectional DS/Free running QS mode
Data strobe is separated DS for write strobe and QS for read strobe.
DS is used to sample write data at write operation. QS is aligned with read data and always clocking
A6
A5
Strobe Select
0
0
Reserved
0
1
Reserved
1
0
Unidirectional DS/QS mode
1
1
Unidirectional DS/Free running QS mode
(E-4)Reserved fied (A7 to A14)
These bits are reserved for future operations and must be set to "0" for normal operation.
- 56 -
REV. 0.0 Nov. 2002