AR0330 Datasheet, PDF (75/77 Pages) ON Semiconductor – CMOS Digital Image Sensor

AR0330: 1/3-Inch CMOS Digital Image Sensor
Revision History
• Updated Table 10, “DC Electrical Definitions and Characteristics (HiSPi Mode),” on
page 18
• Updated Table 12, “Two-Wire Serial Interface Electrical Characteristics,” on page 20
• Updated Table 13, “Two-Wire Serial Interface Timing Specifications,” on page 20
• Updated Figure 8: “Two-Wire Serial Bus Timing Parameters,” on page 20
• Updated Table 16, “I/O Timing,” on page 22
• Updated Figure 17: “Relationship Between Readout Clock and Peak Pixel Rate,” on
page 32
• Updated Table 27, “PLL Parameters for the Serial Interface,” on page 35
• Updated Table 28, “Example PLL Configurations for the Serial Interface,” on page 35
• Added sentence to first paragraph under Figure 34: “Vertical Row Binning in the
AR0330 Sensor,” on page 49
• Updated Figure 39: “Example of the Slave Mode with a Flat-field Illumination,” on
page 57
Rev. J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7/5/11
• Updated Table 10, “DC Electrical Definitions and Characteristics (HiSPi Mode),” on
page 18
Rev. H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6/7/11
• Updated Figure 50: “CSP HiSPi Package,” on page 70
• Added Table 46, “CSP (MIPI/HiSPi) Package Dimensions,” on page 71
Rev.G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5/26/11
• Updated Table 1, “Available Part Numbers,” on page 1
• Updated Table 1, “Key Parameters,” on page 1
• Updated Notes 8 and 10 in Figure 2: “Typical Configuration: Serial Four-Lane HiSPi
Interface,” on page 8
• Updated Notes 8 and 10 in Figure 3: “Typical Configuration: Serial MIPI,” on page 9
• Updated Notes 7 and 9 in Figure 4: “Typical Configuration: Parallel Pixel Data Inter-
face,” on page 10
Rev. F, Advance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/5/11
• Updated Figure 2: “Typical Configuration: Serial Four-Lane HiSPi Interface,” on
page 8
• Updated Table 6, “CSP (HiSPi/MIPI) Package Pinout,” on page 13
• Updated Figure 5: “CLCC Package Pin Descriptions,” on page 14
Rev. E, Advance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12/17/10
• Changed part number from AC0330 to AR0330
• Applied updated Aptina template
• Updated “Power-Up Sequence” on page 15
• Updated Figure 6: “Power Up,” on page 15
• Updated Table 27, “PLL Parameters for the Serial Interface,” on page 35
• Updated column 1 heading in Table 29, “Output Enable Control,” on page 36
• Updated Table 28, “Recommended Sensor Gain Tables,” on page 44
• Updated Figure 30: “Gain Stages in AR0330 Sensor,” on page 44
• Updated Figure 50: “CSP HiSPi Package,” on page 70
Rev. D, Advance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11/1/10
• Changed part number from MT9T002 to AC0330
AR0330_DS Rev. U Pub. 4/15 EN
75
©Semiconductor Components Industries, LLC,2015.