GXM Datasheet, PDF (57/244 Pages) National Semiconductor (TI) – Geode™ GXm Processor Integrated x86 Solution with MMX Support

Processor Programming (Continued)
Table 3-17. TR5-TR3 Bit Definitions
Bit
Name
Description
TR5 Register (R/W)
11:4 Line Selection Line Selection:
Physical address bits 11-4 used to select one of 256 lines.
3:2
Set/DWORD Set/DWord Selection:
Cache read: Selects which of the four sets in the cache is used as the source for data
transferred to the cache flush buffer.
Cache write: Selects which of the four sets in the cache is used as the destination for data transferred
from the cache fill buffer.
Flush buffer read: Selects which of the four Dword in the flush buffer is
used during a TR3 read.
Fill buffer write: Selects which of the four Dword in the fill buffer is written during a TR3 write.
1:0
Control Bits Control Bits:
If = 00: flush read or fill buffer write.
If = 01: cache write.
If = 10: cache read.
If = 11: cache flush.
TR4 Register (R/W)
31:12
10
9:7
6:3
2:0
Upper Tag
Address
Valid Bit
LRU Bits
Dirty Bits
RSVD
Upper Tag Address:
Cache read: Upper 20 bits of tag address of the selected entry.
Cache write: Data written into the upper 20 bits of the tag address of the selected entry.
Valid Bit:
Cache read: Valid bit for the selected entry.
Cache write: Data written into the valid bit for the selected entry.
LRU Bits:
Cache read: The LRU bits for the selected line.
xx1 = Set 0 or Set 1 most recently accessed.
xx0 = Set 2 or Set 3 most recently accessed.
x1x = Most recent access to Set 0 or Set 1 was to Set 0.
x0x = Most recent access to Set 0 or Set 1 was to Set 1.
1xx = Most recent access to Set 2 or Set 3 was to Set 2.
0xx = Most recent access to Set 2 or Set 3 was to Set 3.
Cache write: Ignored.
Dirty Bits:
Cache read: The dirty bits for the selected entry (one bit per DWord).
Cache write: Data written into the dirty bits for the selected entry.
Reserved: Set to 0.
TR3 Register (R/W)
31:0
Cache Data
Cache Data:
Flush buffer read: Data accessed from the cache flush buffer.
Fill buffer write: Data to be written into the cache fill buffer.
Revision 3.1
57
www.national.com