M16C Datasheet, PDF (196/262 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

Preliminary Specifications REV.B
Specifications in this manual are tentative and subject to change.
Mitsubishi microcomputers
M16C / 6N Group
Electrical characteristics
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Table 21-2. Recommended operating conditions (referenced to Vcc = 4.5 V to 5.5V at Ta = -40 to
85 °C (Note 3) unless otherwise specified)
Symbol
Parameter
Vcc
AVcc
Vss
AVss
VIH
Supply voltage
Analog supply voltage
Supply voltage
Analog supply voltage
HIGH input ^{P31 to P37, P40 to P47, P50 to P57, P60 to P67, P70, 0,}
voltage ^{P72 to P77, P80 to P87, P90, P92 to P97, P100 to P107,}
XIN, RESET, CNVSS, BYTE
P91, P71
P00 to P07, P10 to P17, P20 to P27, P30 (during single-chip mode)
P00 to P07, P10 to P17, P20 to P27, P30
(data input function during memory expansion and microprocessor modes)
LOW input P31 to P37, P40 to P47, P50 to P57, P60 to P67,
voltage P70 to P77, P80 to P87, P90 to P97, P100 to P107,
VIL
XIN, RESET, CNVSS, BYTE
P00 to P07, P10 to P17, P20 to P27, P30 (during single-chip mode)
P00 to P07, P10 to P17, P20 to P27, P30
(data input function during memory expansion and microprocessor modes)
HIGH peak output
I OH (peak) _current
HIGH average output
I OH (avg) ^current
P00 to P07, P10 to P17, P20 to P27,P30 to P37,
P40 to P47, P50 to P57, P60 to P67,P70,P72 to P77,
P80 to P84,P86,P87, P90 ,P92 to P97,P100 to P107
P00 to P07, P10 to P17, P20 to P27,P30 to P37,
P40 to P47, P50 to P57, P60 to P67,P72 to P77,
P80 to P84,P86,P87,P90 to P97,P100 to P107
LOW peak output
I OL (peak) current
P00 to P07, P10 to P17, P20 to P27,P30 to P37,
P40 to P47, P50 to P57, P60 to P67,P70 to P77,
P80 to P84,P86,P87,P90 to P97,P100 to P107
I OL (avg)
f (XIN)
f (XcIN)
LOW average
P00 to P07, P10 to P17, P20 to P27,P30 to P37,
output current
P40 to P47, P50 to P57, P60 to P67,P70 to P77,
P80 to P84,P86,P87,P90 to P97,P100 to P107
Main clock input
No wait Mask ROM, Flash
oscillation frequency
With wait Mask ROM, Flash
Vcc=4.2V to 5.5V
Vcc=4.2V to 5.5V
Vcc=4.2V to 5.5V
Vcc=4.2V to 5.5V
Subclock oscillation frequency
Standard
Min Typ. Max.
4.2
5.0
5.5
Vcc
0
0
0.8Vcc
Vcc
0.8Vcc
6.5
0.8Vcc
Vcc
0.5Vcc
Vcc
0
0.2Vcc
0
0.2Vcc
0
0.16Vcc
-10.0
-5.0
10.0
5.0
0
16
0
20
0
16
0
20
32.768
50
Unit
V
V
V
V
V
V
V
V
V
V
V
mA
mA
mA
mA
MHz
MHz
MHz
MHz
kHz
Note 1: The mean output current is the mean value within 100ms.
Note 2: The total IOL (peak) for ports P0, P1, P2, P86, P87, P9, and P10 must be 80mA max. The total IOH (peak) for ports P0, P1,
P2, P86, P87, P9, and P10 must be 80mA max. The total IOL (peak) for ports P3, P4, P5, P6, P7, and P8 0 to P84 must be
80mA max. The total IOH (peak) for ports P3, P4, P5, P6, P72 to P77, and P80 to P84 must be 80mA max.
Note 3: Specify a product of -40 to 85°C to use it.
Note 4: Relationship between main clock oscillation frequency and supply voltage.
Main clock input oscillation frequency
(EPROM, One-time PROM, No wait)
16.0
6.95 X VCC - 15.275MHZ
3.5
Main clock input oscillation frequency
(Mask ROM, No wait)
16.0
7.33 X VCC - 14.791MHZ
5.0
Main clock input oscillation frequency
(EPROM, One-time PROM, With wait)
16.0
5 X VCC - 6.5MHZ
7.0
Main clock input oscillation frequency
(Mask ROM, With wait)
16.0
4 X VCC - 0.8MHZ
10.0
0.0
2.7
4.5
5.5
Supply voltage[V]
(BCLK: no division)
0.0
2.7
4.2
5.5
Supply voltage[V]
(BCLK: no division)
0.0
2.7
4.5
5.5
Supply voltage[V]
(BCLK: no division)
0.0
2.7
4.2
5.5
Supply voltage[V]
(BCLK: no division)
Note 5: Execute case without wait, program/erase of flash memory by Vcc = 4.2V to 5.5V and f(BCLK) ≤ 6.25 MHz. Execute case
with wait, program/erase of flash memory by Vcc = 4.2V to 5.5V and f(BCLK) ≤ 12.5 MHz.
196