M16C Datasheet, PDF (175/262 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

Preliminary Specifications REV.B
Mitsubishi microcomputers
Specifications in this manual are tentative and subject to change.
M16C / 6N Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
CAN Module
CAN Slot Interrupt Control Register
CAN Slot Interrupt Control Register
(b15)
b7 b6
(b8)
b0 b7
b0
Symbol
C0SICR
C1SICR
Address
0217₁₆, 0216₁₆
0237₁₆, 0236₁₆
When reset
0000₁₆
0000₁₆
Function
Values that can be set for each bit R W
Interrupt Enable Bits
0: After a successful transmission O O
Each bit corresponds with the appropriate message ^{or reception operation no}
mailbox.
interrupt request bit is set.
The transfer interrupts (’Successful Reception’ / ^{1: After a successful transmission}
’Successful Transmission’) for each message
mailbox can be enabled and disabled.
or reception operation the
interrupt request bit in the corre-
sponding MCU interrupt
control register is set.
Note: These bits can not be set in Reset/Initialization Mode.
Figure 18-11. Structure of CAN slot interrupt control register
175