M1A3P250-VQ100 Datasheet, PDF (67/210 Pages) Microsemi Corporation – ProASIC3 Flash Family FPGAs with Optional Soft ARM Support

ProASIC3 Flash Family FPGAs
Table 2-82 • 1.5 V LVCMOS High Slew
Commercial-Case Conditions: T_J = 70°C, Worst-Case VCC = 1.425 V, Worst-Case VCCI = 1.4 V
Applicable to Standard Plus I/O Banks
Drive
Strength
2 mA
Speed
Grade
Std.
t_DOUT t_DP t_DIN t_PY t_EOUT t_ZL t_ZH t_LZ t_HZ t_ZLS t_ZHS Units
0.66 7.83 0.04 1.42 0.43 6.42 7.83 2.71 2.55 8.65 10.07 ns
–1
0.56 6.66 0.04 1.21 0.36 5.46 6.66 2.31 2.17 7.36 8.56 ns
–2
0.49 5.85 0.03 1.06 0.32 4.79 5.85 2.02 1.90 6.46 7.52 ns
4 mA
Std.
0.66 4.84 0.04 1.42 0.43 4.49 4.84 3.03 3.13 6.72 7.08 ns
–1
0.56 4.12 0.04 1.21 0.36 3.82 4.12 2.58 2.66 5.72 6.02 ns
–2
0.49 3.61 0.03 1.06 0.32 3.35 3.61 2.26 2.34 5.02 5.28 ns
Notes:
1. Software default selection highlighted in gray.
2. For specific junction temperature and voltage supply levels, refer to Table 2-6 on page 2-6 for derating values.
Table 2-83 • 1.5 V LVCMOS Low Slew
Commercial-Case Conditions: T_J = 70°C, Worst-Case VCC = 1.425 V, Worst-Case VCCI = 1.4 V
Applicable to Standard Plus I/O Banks
Drive
Strength
2 mA
Speed
Grade
Std.
t_DOUT t_DP t_DIN t_PY t_EOUT t_ZL t_ZH t_LZ t_HZ t_ZLS t_ZHS Units
0.66 12.08 0.04 1.42 0.43 12.01 12.08 2.72 2.43 14.24 14.31 ns
–1
0.56 10.27 0.04 1.21 0.36 10.21 10.27 2.31 2.06 12.12 12.18 ns
–2
0.49 9.02 0.03 1.06 0.32 8.97 9.02 2.03 1.81 10.64 10.69 ns
4 mA
Std.
0.66 9.28 0.04 1.42 0.43 9.45 8.91 3.04 3.00 11.69 11.15 ns
–1
0.56 7.89 0.04 1.21 0.36 8.04 7.58 2.58 2.55 9.94 9.49 ns
–2
0.49 6.93 0.03 1.06 0.32 7.06 6.66 2.27 2.24 8.73 8.33 ns
Note: For specific junction temperature and voltage supply levels, refer to Table 2-6 on page 2-6 for derating values.
Table 2-84 • 1.5 V LVCMOS High Slew
Commercial-Case Conditions: T_J = 70°C, Worst-Case VCC = 1.425 V, Worst-Case VCCI = 3.0 V
Applicable to Standard I/O Banks
Drive
Strength
2 mA
Speed
Grade
Std.
t_DOUT
0.66
t_DP
7.65
t_DIN
0.04
t_PY
1.42
t_EOUT
0.43
t_ZL
6.31
t_ZH
7.65
t_LZ
2.45
t_HZ
2.45
Units
ns
–1
0.56 6.50 0.04 1.21 0.36 5.37 6.50 2.08 2.08
ns
–2
0.49 5.71 0.03 1.06 0.32 4.71 5.71 1.83 1.83
ns
Notes:
1. Software default selection highlighted in gray.
2. For specific junction temperature and voltage supply levels, refer to Table 2-6 on page 2-6 for derating values.
Revision 15
2- 62