M1A3P250-VQ100 Datasheet, PDF (56/210 Pages) Microsemi Corporation – ProASIC3 Flash Family FPGAs with Optional Soft ARM Support

ProASIC3 Flash Family FPGAs
Table 2-64 • 2.5 V LVCMOS High Slew
Commercial-Case Conditions: T_J = 70°C, Worst-Case VCC = 1.425 V, Worst-Case VCCI = 3.0 V
Applicable to Standard I/O Banks
Drive
Strength
2 mA
Speed
Grade
Std.
t_DOUT
0.66
t_DP
8.20
t_DIN
0.04
t_PY
1.29
t_EOUT
0.43
t_ZL
7.24
t_ZH
8.20
t_LZ
2.03
t_HZ
1.91
Units
ns
–1
0.56 6.98 0.04 1.10 0.36 6.16 6.98 1.73 1.62 ns
–2
0.49 6.13 0.03 0.96 0.32 5.41 6.13 1.52 1.43 ns
4 mA
Std.
0.66 8.20 0.04 1.29 0.43 7.24 8.20 2.03 1.91 ns
–1
0.56 6.98 0.04 1.10 0.36 6.16 6.98 1.73 1.62 ns
–2
0.49 6.13 0.03 0.96 0.32 5.41 6.13 1.52 1.43 ns
6 mA
Std.
0.66 4.77 0.04 1.29 0.43 4.55 4.77 2.38 2.55 ns
–1
0.56 4.05 0.04 1.10 0.36 3.87 4.05 2.03 2.17 ns
–2
0.49 3.56 0.03 0.96 0.32 3.40 3.56 1.78 1.91 ns
8 mA
Std.
0.66 4.77 0.04 1.29 0.43 4.55 4.77 2.38 2.55 ns
–1
0.56 4.05 0.04 1.10 0.36 3.87 4.05 2.03 2.17 ns
–2
0.49 3.56 0.03 0.96 0.32 3.40 3.56 1.78 1.91 ns
Notes:
1. Software default selection highlighted in gray.
2. For specific junction temperature and voltage supply levels, refer to Table 2-6 on page 2-6 for derating values.
Table 2-65 • 2.5 V LVCMOS Low Slew
Commercial-Case Conditions: T_J = 70°C, Worst-Case VCC = 1.425 V, Worst-Case VCCI = 3.0 V
Applicable to Standard I/O Banks
Drive
Strength
2 mA
Speed
Grade
Std.
t_DOUT
0.66
t_DP
11.00
t_DIN
0.04
t_PY
1.29
t_EOUT
0.43
t_ZL
10.37
t_ZH
11.00
t_LZ
2.03
t_HZ
1.83
Units
ns
–1
0.56 9.35 0.04 1.10 0.36 8.83 9.35 1.73 1.56 ns
–2
0.49 8.21 0.03 0.96 0.32 7.75 8.21 1.52 1.37 ns
4 mA
Std.
0.66 11.00 0.04 1.29 0.43 10.37 11.00 2.03 1.83 ns
–1
0.56 9.35 0.04 1.10 0.36 8.83 9.35 1.73 1.56 ns
–2
0.49 8.21 0.03 0.96 0.32 7.75 8.21 1.52 1.37 ns
6 mA
Std.
0.66 7.50 0.04 1.29 0.43 7.36 7.50 2.39 2.46 ns
–1
0.56 6.38 0.04 1.10 0.36 6.26 6.38 2.03 2.10 ns
–2
0.49 5.60 0.03 0.96 0.32 5.49 5.60 1.78 1.84 ns
8 mA
Std.
0.66 7.50 0.04 1.29 0.43 7.36 7.50 2.39 2.46 ns
–1
0.56 6.38 0.04 1.10 0.36 6.26 6.38 2.03 2.10 ns
–2
0.49 5.60 0.03 0.96 0.32 5.49 5.60 1.78 1.84 ns
Note: For specific junction temperature and voltage supply levels, refer to Table 2-6 on page 2-6 for derating values.
Revision 15
2- 51