PIC18F67J11T-I Datasheet, PDF(66/466 Page) Microchip Technology – 64/80-Pin, High-Performance, 1-Mbit Flash Microcontrollers

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

PIC18F67J11T-I Datasheet, PDF (66/466 Pages) Microchip Technology – 64/80-Pin, High-Performance, 1-Mbit Flash Microcontrollers

◁

PIC18F87J11 FAMILY

TABLE 5-3: INITIALIZATION CONDITIONS FOR ALL REGISTERS(4) (CONTINUED)

Register

Applicable Devices

Power-on Reset,

Brown-out Reset

MCLR Resets,

WDT Reset,

RESET Instruction,

Stack Resets,

CM Resets

Wake-up via WDT

or Interrupt

PMADDRH PIC18F6XJ1X PIC18F8XJ1X 0000 0000

0000 0000

uuuu uuuu

PMDOUT1H PIC18F6XJ1X PIC18F8XJ1X 0000 0000

0000 0000

uuuu uuuu

PMADDRL PIC18F6XJ1X PIC18F8XJ1X 0000 0000

0000 0000

uuuu uuuu

PMDOUT1L PIC18F6XJ1X PIC18F8XJ1X 0000 0000

0000 0000

uuuu uuuu

PMDIN1H

PIC18F6XJ1X PIC18F8XJ1X 0000 0000

0000 0000

uuuu uuuu

PMDIN1L

PIC18F6XJ1X PIC18F8XJ1X 0000 0000

0000 0000

uuuu uuuu

PMCONH

PIC18F6XJ1X PIC18F8XJ1X 0-00 0000

0-00 0000

u-uu uuuu

PMCONL

PIC18F6XJ1X PIC18F8XJ1X 0000 0000

0000 0000

uuuu uuuu

PMMODEH PIC18F6XJ1X PIC18F8XJ1X 0000 0000

0000 0000

uuuu uuuu

PMMODEL PIC18F6XJ1X PIC18F8XJ1X 0000 0000

0000 0000

uuuu uuuu

PMDOUT2H PIC18F6XJ1X PIC18F8XJ1X 0000 0000

0000 0000

uuuu uuuu

PMDOUT2L PIC18F6XJ1X PIC18F8XJ1X 0000 0000

0000 0000

uuuu uuuu

PMDIN2H

PIC18F6XJ1X PIC18F8XJ1X 0000 0000

0000 0000

uuuu uuuu

PMDIN2L

PIC18F6XJ1X PIC18F8XJ1X 0000 0000

0000 0000

uuuu uuuu

PMEH

PIC18F6XJ1X PIC18F8XJ1X 0000 0000

0000 0000

uuuu uuuu

PMEL

PIC18F6XJ1X PIC18F8XJ1X 0000 0000

0000 0000

uuuu uuuu

PMSTATH

PIC18F6XJ1X PIC18F8XJ1X

00-- 0000

00-- 0000

uu-- uuuu

PMSTATL

PIC18F6XJ1X PIC18F8XJ1X 10-- 1111

10-- 1111

uu-- uuuu

Legend: u = unchanged; x = unknown; - = unimplemented bit, read as â0â; q = value depends on condition.

Shaded cells indicate conditions do not apply for the designated device.

Note 1: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are

updated with the current value of the PC. The STKPTR is modified to point to the next location in the

hardware stack.

2: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the interrupt

vector (0008h or 0018h).

3: One or more bits in the INTCONx or PIRx registers will be effected (to cause wake-up).

4: See Table 5-2 for Reset value for specific conditions.

DS39778E-page 66

ï£ 2007-2012 Microchip Technology Inc.

▷