PIC18F67J11T-I Datasheet, PDF (403/466 Pages) Microchip Technology – 64/80-Pin, High-Performance, 1-Mbit Flash Microcontrollers

PIC18F87J11 FAMILY
28.1 DC Characteristics: Supply Voltage
PIC18F87J11 Family (Industrial)
PIC18F87J11 Family
(Industrial)
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
Param
No.
Symbol
Characteristic
Min Typ Max Units
Conditions
D001 VDD
Supply Voltage
VDDCORE —
3.6
V ENVREG tied to VSS
2.0
—
3.6
V ENVREG tied to VDD
D001B VDDCORE External Supply for
2.0
—
2.7
V ENVREG tied to VSS
Microcontroller Core
D001C AVDD Analog Supply Voltage VDD – 0.3 — VDD + 0.3 V
D001D AVSS Analog Ground Potential VSS – 0.3 — VSS + 0.3 V
D002 VDR
RAM Data Retention
Voltage⁽¹⁾
1.5
—
—
V
D003 VPOR
VDD Power-on Reset
Voltage
—
—
0.7
V See Section 5.3 “Power-on
Reset (POR)” for details
D004 SVDD
VDD Rise Rate
to Ensure Internal
Power-on Reset Signal
0.05 —
— V/ms See Section 5.3 “Power-on
Reset (POR)” for details
D005 VBOR
Brown-out Reset Voltage 1.75⁽²⁾ 2.0
2.4
V
Note 1: This is the limit to which VDD can be lowered in Sleep mode, or during a device Reset, without losing
RAM data.
2: When the Brown-out Reset is enabled, the part will continue to operate until the BOR occurs. This is valid,
although VDD may be below the minimum VDD voltage.
 2007-2012 Microchip Technology Inc.
DS39778E-page 403