PIC18F67J11T-I Datasheet, PDF(26/466 Page) Microchip Technology – 64/80-Pin, High-Performance, 1-Mbit Flash Microcontrollers

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

PIC18F67J11T-I Datasheet, PDF (26/466 Pages) Microchip Technology – 64/80-Pin, High-Performance, 1-Mbit Flash Microcontrollers

◁

PIC18F87J11 FAMILY

TABLE 1-4: PIC18F8XJ1X PINOUT I/O DESCRIPTIONS (CONTINUED)

Pin Name

Pin Number Pin Buffer

80-TQFP Type Type

Description

PORTF is a bidirectional I/O port.

RF1/AN6/C2OUT

RF1

AN6

C2OUT

23

I/O

ST

Digital I/O.

I Analog Analog Input 6.

O

â

Comparator 2 output.

RF2/PMA5/AN7/C1OUT

RF2

PMA5

AN7

C1OUT

18

I/O

ST

Digital I/O.

O

â

Parallel Master Port address.

I Analog Analog Input 7.

O

â

Comparator 1 output.

RF3/AN8/C2INB

RF3

AN8

C2INB

17

I/O

ST

Digital input.

I Analog Analog Input 8.

I Analog Comparator 2 Input B.

RF4/AN9/C2INA

RF4

AN9

C2INA

16

I/O

ST

Digital input.

I Analog Analog Input 8.

I Analog Comparator 2 Input A.

RF5/PMD2/AN10/

C1INB/CVREF

RF5

PMD2(7)

AN10

C1INB

CVREF

15

I/O

ST

I/O TTL

I Analog

I Analog

O Analog

Digital I/O.

Parallel Master Port address.

Analog Input 10.

Comparator 1 Input B.

Comparator reference voltage output.

RF6/PMD1/AN11/C1INA

RF6

PMD1(7)

AN11

C1INA

14

I/O

ST

Digital I/O.

I/O TTL

Parallel Master Port address.

I Analog Analog Input 11.

I Analog Comparator 1 Input A.

RF7/PMD0/SS1

RF7

PMD0(7)

SS1

13

I/O

ST

Digital I/O.

I/O TTL

Parallel Master Port address.

I

TTL

SPI slave select input.

Legend: TTL = TTL compatible input

CMOS = CMOS compatible input or output

ST = Schmitt Trigger input with CMOS levels

Analog = Analog input

I = Input

O

= Output

P = Power

I2C = ST with I2Câ¢ or SMB levels

OD = Open-Drain (no P diode to VDD)

Note 1: Alternate assignment for ECCP2/P2A when Configuration bit, CCP2MX, is cleared (Extended Microcontroller mode).

2: Default assignment for ECCP2/P2A for all devices in all operating modes (CCP2MX is set).

3: Default assignments for P1B/P1C/P3B/P3C (ECCPMX Configuration bit is set).

4: Alternate assignment for ECCP2/P2A when CCP2MX is cleared (Microcontroller mode).

5: Alternate assignments for P1B/P1C/P3B/P3C (ECCPMX Configuration bit is cleared).

6: Default assignment for PMP data and control pins when PMPMX Configuration bit is set.

7: Alternate assignment for PMP data and control pins when PMPMX Configuration bit is cleared (programmed).

DS39778E-page 26

ï£ 2007-2012 Microchip Technology Inc.

▷