PIC18F1XK22 Datasheet, PDF (344/388 Pages) Microchip Technology – 20-Pin Flash Microcontrollers with nanoWatt XLP Technology

PIC18F1XK22/LF1XK22
25.8 DC Characteristics: Power-Down Current, PIC18F1XK22/LF1XK22-I/E
(Industrial, Extended) (Continued)
PIC18LF1XK22
PIC18F1XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Param
No.
Device Characteristics
Min.
Typ†
Max.
+85°C
Max.
+125°C
Units
VDD
Conditions
Note
Power-down Module Current
D032
—
.7
1.0
8.9
A
1.8 A/D Current^{(1, 4)}, no conversion in
—
.8
2.1
10
A
3.0 ^progress
D032
—
18
42
57
A
1.8 A/D Current^{(1, 4)}, no conversion in
—
20
44
61
A
3.0 ^progress
—
22
46
64
A
5.0
D033
—
20
30
—
22
32
35
A
1.8 Comparator Current, low power
35
A
3.0 ^{C1 and C2 enabled}
D033
—
23
54
65
A
1.8 Comparator Current, low power
D033A
D033A
D034
D034
—
31
57
—
33
60
70
A
3.0
C1 and C2 enabled
75
A
5.0
—
80
110
160
A
1.8 Comparator Current, high power
— 100 130
165
A
3.0 ^{C1 and C2 enabled}
—
90
135
150
A
1.8 Comparator Current, high power
—
110 140
165
A
3.0
C1 and C2 enabled
— 120 149
180
A
5.0
—
13
18
22
A
1.8 Voltage Reference Current
—
22
30
31
A
3.0
—
27
60
75
A
1.8 Voltage Reference Current
—
35
80
85
A
3.0
—
48
85
100
A
5.0
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
Note 1: The peripheral current is the sum of the base IDD or IPD and the additional current consumed when this peripheral is
enabled. The peripheral  current can be determined by subtracting the base IDD or IPD current from this limit. Max
values should be used when calculating total current consumption.
2: The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with
the part in Sleep mode, with all I/O pins in high-impedance state and tied to VDD.
3: Fixed Voltage Reference is automatically enabled whenever the BOR is enabled.
4: A/D oscillator source is FRC.
DS41365D-page 344
Preliminary
 2010 Microchip Technology Inc.