|
PIC18F1XK22 Datasheet, PDF (341/388 Pages) Microchip Technology – 20-Pin Flash Microcontrollers with nanoWatt XLP Technology | |||
|
◁ |
PIC18F1XK22/LF1XK22
25.6 DC Characteristics: Secondary Run Supply Current, PIC18F1XK22/LF1XK22-I/E
(Industrial, Extended)
PIC18LF1XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ï£ TA ï£ +85°C for industrial
-40°C ï£ TA ï£ +125°C for extended
PIC18F1XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ï£ TA ï£ +85°C for industrial
-40°C ï£ TA ï£ +125°C for extended
Param
No.
Device Characteristics
Typ. Max. Units
Conditions
D022
Supply Current (IDD)(1, 2, 4)
D022A
6
9 ïA
7
10 ïA
8
14 ïA
11 17 ïA
11 15 ïA
12 16 ïA
16 25 ïA
26 28 ïA
-40°C
+25°C
+85°C
+125°C
-40°C
+25°C
+85°C
+125°C
VDD = 1.8V
VDD = 3.0V
FOSC = 32 kHz(3)
(SEC_RUN mode,
Timer1 as clock)
D022
22 65 ïA
23 67 ïA
25 69 ïA
-40°C
+25°C
+85°C
VDD = 1.8V
28 75 ïA
+125°C
D022A
25 70 ïA
27 72 ïA
30 74 ïA
32 77 ïA
-40°C
+25°C
+85°C
+125°C
VDD = 3.0V
FOSC = 32 kHz(3)
(SEC_RUN mode,
Timer1 as clock)
D022B
30 75 ïA
-40°C
32 77 ïA
34 79 ïA
+25°C
+85°C
VDD = 5.0V
35 83 ïA
+125°C
* These parameters are characterized but not tested.
Note 1: The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin
loading and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact
on the current consumption.
3: For RC oscillator configurations, current through REXT is not included. The current through the resistor can be
extended by the formula IR = VDD/2REXT (mA) with REXT in kïï®
4: FVR and BOR are disabled.
ï£ 2010 Microchip Technology Inc.
Preliminary
DS41365D-page 341
|
▷ |