PIC18F1XK22 Datasheet, PDF (343/388 Pages) Microchip Technology – 20-Pin Flash Microcontrollers with nanoWatt XLP Technology

PIC18F1XK22/LF1XK22
25.8 DC Characteristics: Power-Down Current, PIC18F1XK22/LF1XK22-I/E
(Industrial, Extended)
PIC18LF1XK22
PIC18F1XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Param
No.
D027
D027
D028
Device Characteristics Min.
Power-down Base Current (IPD)⁽²⁾
—
—
—
—
—
Power-down Module Current
—
Typ†
.034
.055
16
18
20
.46
Max.
+85°C
Max.
+125°C
Units
1.0
8.8
A
1.9
9.7
A
40
55
A
43
60
A
45
63
A
1.3
9.5
A
Conditions
VDD
Note
1.8 WDT, BOR, FVR, T1OSC
3.0 ^{disabled, all Peripherals Inactive}
1.8 WDT, BOR, FVR and T1OSC
3.0 ^{disabled, all Peripherals Inactive}
5.0
1.8 LPWDT Current⁽¹⁾
D028
D029
D029
D030
D030
D031
D031
*
†
Note 1:
2:
3:
4:
—
.74 2.25
10.5
A
3.0
—
20
44
60
A
1.8 LPWDT Current⁽¹⁾
—
21
46
63
A
3.0
—
22
48
—
12
20
65
A
5.0
28
A
1.8 FVR Current ⁽³⁾
—
14
22
—
30
60
30
A
3.0
75
A
1.8 FVR Current⁽³⁾
—
50
70
85
A
3.0
—
70
105
135
A
5.0
—
12
21
23
A
3.0 BOR Current^{(1, 3)}
—
30
55
80
A
3.0 BOR Current^{(1, 3)}
—
64
100
120
A
5.0
—
.65
—
—
A
1.8 T1OSC Current⁽¹⁾
—
1.8
—
—
18
42
—
A
3.0
57
A
1.8 T1OSC Current⁽¹⁾
—
20
44
61
A
3.0
—
22
46
64
A
5.0
These parameters are characterized but not tested.
Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
The peripheral current is the sum of the base IDD or IPD and the additional current consumed when this peripheral is
enabled. The peripheral  current can be determined by subtracting the base IDD or IPD current from this limit. Max
values should be used when calculating total current consumption.
The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with
the part in Sleep mode, with all I/O pins in high-impedance state and tied to VDD.
Fixed Voltage Reference is automatically enabled whenever the BOR is enabled.
A/D oscillator source is FRC.
 2010 Microchip Technology Inc.
Preliminary
DS41365D-page 343