PIC18F1XK22 Datasheet, PDF (157/388 Pages) Microchip Technology – 20-Pin Flash Microcontrollers with nanoWatt XLP Technology

PIC18F1XK22/LF1XK22
14.3.4.5 Clock Synchronization and
the CKP bit
When the CKP bit is cleared, the SCL output is forced
to ‘0’. However, clearing the CKP bit will not assert the
SCL output low until the SCL output is already sam-
pled low. Therefore, the CKP bit will not assert the
SCL line until an external I²C master device has
already asserted the SCL line. The SCL output will
remain low until the CKP bit is set and all other
devices on the I²C bus have deasserted SCL. This
ensures that a write to the CKP bit will not violate the
minimum high time requirement for SCL (see
Figure 14-12).
FIGURE 14-12: CLOCK SYNCHRONIZATION TIMING
Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4
SDA
SCL
CKP
WR
SSPCON1
DX
Master device
asserts clock
Master device
deasserts clock
DX – 1
 2010 Microchip Technology Inc.
Preliminary
DS41365D-page 157