82P33714_17 Datasheet, PDF (64/64 Pages) Integrated Device Technology – Synchronous Equipment Timing Source for Synchronous Ethernet

ORDERING INFORMATION
Table 38: Ordering Information
Part/Order Number
82P33714ANLG
Package
72-Pin QFN
"G" after the two-letter package code denotes Pb-Free configuration, RoHS compliant.
REVISION HISTORY
Rev.
2
2
2
2
2
3
4
5
6
Date
12/12/14
1/28/15
2/05/15
4/20/15
5/13/15
6/10/15
3/28/16
1/9/17
1/23/17
Description of Change
Page 51, Table 31
Page 14
Pages 37, 58 (Table 38), 61 (Table 40), 62 (Table 41)
Pages 58, 60, 62-67
Page 51
Pages 9, 12, 13, 39, 40, 41
Page 31, 52
Pages, 1, 4, 22, 23, 28-29, 60
Pages 3-4, 60
Temperature
-40^o to +85^oC
Corporate Headquarters
6024 Silver Creek Valley Road
San Jose, CA 95138 USA
Sales
1-800-345-7015 or 408-284-8200
Fax: [phone]
www.IDT.com
Tech Support
email: [e-mail]
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its affiliated companies (herein referred to as “IDT”) reserve the right to modify the products and/or specifications described herein at any time and at
IDT’s sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of
the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without repre-
sentation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT’s products for any particular purpose, an implied warranty of merchantability, or non-infringement of
the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties.
IDT’s products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably
expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.
While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology (IDT) assumes no responsibility for either its use or for the infringement of any patents or
other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications, such as
those requiring extended temperature ranges, high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any
circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.
Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Product specification subject to change without notice. Other trademarks and service marks used herein, including protected
names, logos and designs, are the property of IDT or their respective third party owners.
Copyright ©2017 Integrated Device Technology, Inc. All rights reserved.