|
ICS1893Y-10 Datasheet, PDF (10/150 Pages) – | |||
|
◁ |
ICS1893Y-10 Data Sheet - Release
Revision History
⢠This release of this document, Rev C, is dated May 22, 2000. Change bars indicate where all changes
are made. (For an explanation of change bars, see the Change Bar note on this page.) The following list
also indicates where changes occur.
â Table of Contents reflect page renumbering.
â Table 3-1 value xxx changes from 000011b to 000100b
â Section 5.5, âTwisted-Pair Interfaceâ text changes.
â Section 5.5.1, âTwisted-Pair Transmitter Interfaceâ and Section 5.5.2, âTwisted-Pair Receiver
Interfaceâ are two new sections with two new figures.
â Section 6.6, âClock Reference Interfaceâ reflects deletion of references to crystal oscillator, as the
ICS1893Y-10 does not work with a crystal. (Section 6.6.1 and Section 6.6.2 are deleted.)
â Section 5.8, âStatus Interfaceâ has two new notes, Notes 5 and 6.
â A new figure, Figure 5-4, follows Section 5.8, âStatus Interfaceâ.
â Table 7-9 value changes from F420 to F441.
â Section 7.5.2, âManufacturer's Model Number (bits 3.9:4)â text changes.
â Table 7-10 value changes from 0000 to 0001.
â In the following areas, ICS1894 changes to ICS1893Y-10:
⢠Section 7.13.1, âRemote Jabber Detect (bit 18.15)â
⢠Table 8-5 RXCLK pin description.
⢠Table 8-6 RXCLK pin description.
⢠Table 8-8 NC pin description.
â In the following sections, pin 54 changes from VDD_IO to VDD:
⢠Section 8.1, âICS1893Y-10 Pin Diagramâ
⢠Section 8.2, âICS1893Y-10 Pin Listingsâ
⢠Section 8.3.6, âGround and Power Pinsâ
â Table 8-4 text changes for the REF_IN and REF_OUT pin descriptions.
â Table 8-7 text changes for the RXTRI pin descriptions.
â Section 8.3.6, âGround and Power Pinsâ adds the VSS ground pin, pin 22.
â Section 9.3, âRecommended Component Valuesâ text changes.
â A new figure, Figure 9-1, follows Section 9.3, âRecommended Component Valuesâ.
ICS1893Y-10 Rev F 1/20/04
Copyright © 2004, Integrated Circuit Systems, Inc.
All rights reserved.
10
January, 2004
|
▷ |