HD404669 Datasheet, PDF (126/142 Pages) Hitachi Semiconductor – Low-Voltage AS Microcomputers with On-Chip DTMF Generation Circuit

HD404669 Series
Absolute Maximum Ratings
Item
Symbol
Value
Unit
Notes
Supply voltage
Programming voltage
Pin voltage
Total permissible input current (to chip)
Total permissible output current
(from chip)
V_CC
V_PP
V_T
∑I_o
–∑I_o
–0.3 to +7.0
V
–0.3 to +14.0
V
1
–0.3 to (V_CC + 0.3)
V
100
mA
2
50
mA
3
Maximum input current (to chip)
I_o
4
30
mA
4, 5
mA
4, 6
Maximum output current (from chip)
–I_o
4
20
mA
7, 8
mA
7, 9
Operating temperature
T_opr
–20 to +75
°C
10
Storage temperature
T_stg
–55 to +125
°C
11
Notes: 1. Applies to D₁₃ (V_PP) of the HD407A4669.
2. The total permissible input current is the total of input currents simultaneously flowing in from all
the I/O pins to ground.
3. The total permissible output current is the total of output currents simultaneously flowing out from
V_CC to all I/O pins.
4. The maximum input current is the maximum current flowing from each I/O pin to ground.
5. Applies to D₀–D_3, R0–R4 and R6–RA.
6. Applies to D₄, D₅ and D₉–D₁₁
7. The maximum output current is the maximum current flowing out from V_CC to each I/O pin.
8. Applies to D₄, D₅, D₉–D₁₁, R0–R4 and R6–RA.
9. Applies to D₀–D₃.
10. The operating temperature indicates the temperature range in which power can be supplied to
the LSI (voltage V_CC shown in the electrical characteristics tables can be applied).
11. In the case of chips, the storage specification differs from that of the package products. Please
consult your Hitachi sales representative for details.
Permanent damage may occur if these absolute maximum ratings are exceeded. Normal
operation must be under the conditions stated in the electrical characteristics tables. If these
conditions are exceeded, the LSI may malfunction or its reliability may be affected.
126