MB86293 Datasheet, PDF (62/285 Pages) Fujitsu Component Limited. – Grraphiics Conttrrollllerr Speciiffiicattiions

FUJITSU LIMITED
PRELIMINARY and CONFIDENTIAL
6.5.2 Interlace display
CORAL can perform both a non-interlace display and an interlace display.
When the DCM register synchronization mode is set to interlace video (11), images in memory are output
in odd and even rasters alternately to each field, and one frame (odd + even fields) forms one screen.
When the DCM register synchronization mode is set to interlace (10), images in memory are output in
raster order. The same image data is output to odd fields and even fields. Consequently, the count of
rasters on the screen is half of that of interlace video. However, unlike the non-interlace mode, there is a
distinction between odd and even fields depending on the phase relationship between the horizontal and
vertical synchronous signals.
Odd
Eve
n
Non-Interlace
Interlace Video
Interlace
Fig. 5.4 Display Difference between Synchronization Modes
MB86293 CORAL_LQ
Graphics Controller
62
Specifications Rev. 1.1