MB86293 Datasheet, PDF (100/285 Pages) Fujitsu Component Limited. – Grraphiics Conttrrollllerr Speciiffiicattiions

FUJITSU LIMITED
PRELIMINARY and CONFIDENTIAL
9.2.2 Explanation of geometry commands
G_Nop (Format 1)
31
24 23
16 15
0
G_Nop
Reserved
Reserved
No operation
G_Init (Format 1)
31
24 23
16 15
0
G_Init
Reserved
Reserved
The G_ Init command initializes geometry engine. Execute this command before processing.
G_End (Format 1)
31
24 23
16 15
0
G_End
Reserved
Reserved
The G_End command ends one primitive. The G_Vertex command must be specified between the
G_Begin or G_BeginCont command and G_End command.
MB86293 CORAL_LQ
Graphics Controller
100
Specifications Rev. 1.1