MB86293 Datasheet, PDF (38/285 Pages) Fujitsu Component Limited. – Grraphiics Conttrrollllerr Speciiffiicattiions

FUJITSU LIMITED
PRELIMINARY and CONFIDENTIAL
4.1.3 BS signal mode
Connection to a CPU without the BS signal can be made via the BS_MODE signal. This setting can be
performed for all CPU modes. To connect to a CPU without the BS signal, set the BS_MODE signal to
“High” level.
When not using the BS signal, fix the BS pin of CORAL at “High” level.
When using the BS_MODE signal as “High” level, with the normally ready mode established, set the CPU
software wait to three cycles.
Table 4-3 BS Signal Mode
BS_ MODE
L
H
Operation of BS signal
Connects to CPU with BS signal
Connects to CPU without BS signal
4.1.4 Endian
CORAL operates in little-endian mode. All the register address descriptions in the specifications are byte
address in little endian. When using a big-endian CPU, note that the byte-or word-addresses are
different from these descriptions.
MB86293 CORAL_LQ
Graphics Controller
38
Specifications Rev. 1.1