English
Language : 

MB86293 Datasheet, PDF (161/285 Pages) Fujitsu Component Limited. – Grraphiics Conttrrollllerr Speciiffiicattiions
FUJITSU LIMITED
PRELIMINARY and CONFIDENTIAL
L1EM (L1 layer Extended Mode)
Register
address
DisplayBaseAddress + 120H
Bit number 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 − − − 4 3 2 1 0
Bit field name L1EC Reserved
L1PB
Reserved
R/W
RW
R0
RW
R0
Initial value 0
0
0
0
Bit 23 to 20
L1PB (L1 layer Palette Base)
Shows the value added to the index when subtracting palette of L1 layer. 16 times of
setting value is added.
Bit 31 to 30
L1EC (L1 layer Extended Color mode)
Sets extended color mode for L1 layer
00 Mode determined by L0C
01 Direct color (24 bits/pixel) mode
1x Reserved
L1DA (L1 layer Display Address)
Register
address
DisplayBaseAddress + 34H
Bit number 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Bit field name
R/W
Reserved
R0
L0DA
RW
Initial value
0
Don’t care
This register sets the display origin address of the L1 layer. For the direct color mode (16 bits/pixel),
the lower 1 bit is “0”, and this register is treated as being aligned in 2 bytes. Wraparound processing
is not performed for the L1 layer, so the frame origin linear address and display position (X coordinates,
and Y coordinates) are not specified.
L1WX (L1 layer Window position X)
Register
address
DisplayBaseAddress + 124H (DispplayBaseAddress + 18H)
Bit number 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Bit field name
Reserved
L1WX
R/W
R0
RW
Initial value
0
Don’t care
This register sets the X coordinates of the display position of the L1 layer window. This register is
placed in two address spaces. The parenthesized address is the register address to maintain
compatibility with previous products. The same applies to L1WY, L1WW, and L1WH.
L1WY (L1 layer Window position Y)
Register
address
DisplayBaseAddress + 126H (DispplayBaseAddress + 1AH)
Bit number 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Bit field name
R/W
Reserved
R0
L1WY
RW
Initial value
0
Don’t care
This register sets the Y coordinates of the display position of the L1 layer window.
MB86293 CORAL_LQ
Graphics Controller
161
Specifications Rev. 1.1