MB86293 Datasheet, PDF (266/285 Pages) Fujitsu Component Limited. – Grraphiics Conttrrollllerr Speciiffiicattiions

FUJITSU LIMITED
PRELIMINARY and CONFIDENTIAL
12.3 R e c o m m e n d e d O p e r a t i n g C o n d i t i o n s
12.3.1 Recommended operating conditions
Recommended Operating Conditions
Parameter
Symbol
Supply voltage
Input voltage (High level)
Input voltage (low level)
Ambient temperature for operation
*1 Includes PLL power supply
VDDL ^*1
VDDH
VIH
VIL
TA
Min.
1.65
3.0
2.0
−0.3
-40
Rating
Typ.
1.8
3.3
Unit
Max.
1.95
3.6
V
VDDH+0.3
V
0.8
V
85
°C
12.3.2 Note at power-on
• There is no restriction on the sequence of power-on/power-off between V_DDL and V_DDH. However, do not
apply only V_DDH for more than a few seconds.
• Do not input HSYNC, VSYNC, and EO signals when the power supply voltage is not applied. (See the
input voltage item in Maximum rating.)
• There are three reset sequences as described next page. And please input at least 10 BCLK cycles to
BCLK pin before XRST negated.
MB86293 CORAL_LQ
Graphics Controller
266
Specifications Rev. 1.1