MB86294 Datasheet, PDF (59/305 Pages) Fujitsu Component Limited. – Grraphiics Controller specifications

FUJITSU LIMITED
PRELIMINARY and CONFIDENTIAL
6.2.3 Display parameters
The display area is defined according to the following parameters. Each parameter is set independently
at the respective register.
HDB
HTP
HSP
HDP
HSW
LnWY
LnWX
LnWW
LnW H
VSW
Fig. 5.1 Display Parameters
Note: The actual parameter settings are little different from the above. The details, please refer “11.3.1
Interlaced mode”.
HTP
HSP
HSW
HDP
HDB
VTR
VSP
VSW
VDP
LnWX
LnWY
LnWW
LnWH
Horizontal Total Pixels
Horizontal Synchronize pulse Position
Horizontal Synchronize pulse Width
Horizontal Display Period
Horizontal Display Boundary
Vertical Total Raster
Vertical Synchronize pulse Position
Vertical Synchronize pulse Width
Vertical Display Period
Layer n Window position X
Layer n Window position Y
Layer n Window Width
Layer n Window Height
When not splitting the window, set HDP to HDB and display only the left side of the window. The settings
must meet the following relationship:
0 < HDB ≤ HDP < HSP < HSP + HSW + 1 < HTP
0 < VDP < VSP < VSP + VSW + 1 < VTR
MB86294/294S CORAL_LB
Graphics Controller
59
Specifications Rev. 1.0