MB86294 Datasheet, PDF (129/305 Pages) Fujitsu Component Limited. – Grraphiics Controller specifications

FUJITSU LIMITED
PRELIMINARY and CONFIDENTIAL
DrawLine2iP (Format7)
31
DrawLine2iP
24 23
LFYs
Command
16 15
Reserved
LFXs
0
vertex
The DrawLine2iP command draws high-speed 2DLine. It starts drawing after setting parameters at
high-speed 2DLine drawing registers. Only packed integer data can be used for coordinates.
Commands:
ZeroVector
OneVector
Draws line from vertex 0 to vertex 1.
Draws line from vertex 1 to vertex 0.
ZeroVectorNoEnd
OneVectorNoEnd
ZeroVectorBlpClear
OneVectorBlpClear
Draws line from vertex 0 to vertex 1 (without drawing end
point).
Draws line from vertex 1 to vertex 0 (without drawing end
point).
Draws line from vertex 0 to vertex 1 (principal axis X, and
prior to drawing, broken line pattern reference position
cleared).
Draws line from vertex 1 to vertex 0 (principal axis Y, and
prior to drawing, broken line pattern reference position
cleared).
ZeroVectorNoEndBlpClear
OneVectorNoEndBlpClear
Draws line from vertex 0 to vertex 1 (principal axis X, without
end point drawing and prior to drawing, broken line pattern
reference position cleared).
Draws line from vertex 1 to vertex 0 (principal axis Y, without
end point drawing and prior to drawing, broken line pattern
reference position cleared).
AntiZeroVector
AntiOneVector
Draws anti-alias line from vertex 0 to vertex 1.
Draws anti-alias line from vertex 1 to vertex 0.
AntiZeroVectorNoEnd
Draws anti-alias line from vertex 0 to vertex 1 (without end
point).
AntiOneVectorNoEnd
Draws anti-alias line from vertex 1 to vertex 0 (without end
point).
AntiZeroVectorBlpClear
Draws anti-alias line from vertex 0 to vertex 1 (principal axis
X and prior to drawing, broken line pattern reference position
cleared).
AntiOneVectorBlpClear
Draws anti-alias line from vertex 1 to vertex 0 (principal axis
Y and prior to drawing, broken line pattern reference position
cleared).
AntiZeroVectorNoEndBlpClear Draws anti-alias line from vertex 0 to vertex 1 (principal axis
X, without end point drawing and prior to drawing, broken
line pattern reference position cleared).
AntiOneVectorNoEndBlpClear Draws anti-alias line from vertex 1 to vertex 0 (principal axis
Y, without end point drawing and prior to drawing, broken
line pattern reference position cleared).
MB86294/294S CORAL_LB
Graphics Controller
129
Specifications Rev. 1.0