MB86294 Datasheet, PDF (131/305 Pages) Fujitsu Component Limited. – Grraphiics Controller specifications

FUJITSU LIMITED
PRELIMINARY and CONFIDENTIAL
DrawRectP (Format5)
31
24 23
16 15
0
DrawRectP
Command
Reserved
RYs
RXs
RsizeY
RsizeX
The DrawRectP command fills rectangle. The rectangle is filled with the current color after setting
parameters at the rectangle registers. Please set XRES(X resolution) to in 8 byte units when using this
command.
Commands:
BltFill
ClearPolyFlag
Fills rectangle with current color (single).
Fills polygon drawing flag buffer area with 0. The size of drawing
frame is defined in RsizeX,Y.
DrawBitmapP (Format6)
31
24 23
16 15
0
DrawBitmapP
Command
Count
RYs
RXs
RsizeY
RsizeX
(Pattern 0)
(Pattern 1)
⋅⋅⋅
(Pattern n)
The DrawBitmapP command draws rectangle patterns. Please set XRES(X resolution) to in 8 byte
units when using this command.
Commands:
BltDraw
Draws rectangle of 8 bits/pixel or 16 bits/pixel.
DrawBitmap
Draws binary bitmap character pattern. Bit 0 is drawn in transparent
or background color, and bit 1 is drawn in foreground color.
DrawBitmapLargeP (Format11)
31
24 23
16 15
0
DrawBitmapLargeP
Command
Reserved
Count
Rys
Rxs
RsizeY
RsizeX
(Pattern 0)
(Pattern 1)
⋅⋅⋅
(Pattern n)
The DrawBitmapP command draws rectangle patterns.
The parameter(count field) could be used up to 32-bit(*1) unlike DrawBitmapP.
(*1: The data format of counter field is signed long. Thus actually it is possible to use up to 31-bit.)
Please set XRES(X resolution) to in 8 byte units when using this command.
Commands:
BltDraw
Draws rectangle of 8 bits/pixel or 16 bits/pixel.
MB86294/294S CORAL_LB
Graphics Controller
131
Specifications Rev. 1.0