MB86294 Datasheet, PDF (112/305 Pages) Fujitsu Component Limited. – Grraphiics Controller specifications

FUJITSU LIMITED
PRELIMINARY and CONFIDENTIAL
G_BeginECont (Format 1)
31
24 23
16 15
0
G_BeginCont
Reserved
Reserved
When the primitive type set by the G_BeginE command the last time and drawing mode are not
changed, the G_BeginECont command is used instead of the G_BeginE command. The
G_BeginECont command is processed faster than the G_BeginE command.
The packet that can be set between the G_End packet set just before and the G_BeginCont packet is
only ‘foreground color setting by the SetRegister packet.’ The G_Vertex command must be specified
between the G_Begin or G_BeginCont command and G_End command. No primitive type need be
specified in the G_BeginCont command.
MB86294/294S CORAL_LB
Graphics Controller
112
Specifications Rev. 1.0