MB86294 Datasheet, PDF (108/305 Pages) Fujitsu Component Limited. – Grraphiics Controller specifications

FUJITSU LIMITED
PRELIMINARY and CONFIDENTIAL
10.2.2 Explanation of geometry commands
G_Nop (Format 1)
31
24 23
16 15
0
G_Nop
Reserved
Reserved
No operation
G_Init (Format 1)
31
24 23
16 15
0
G_Init
Reserved
Reserved
The G_ Init command initializes geometry engine. Execute this command before processing.
G_End (Format 1)
31
24 23
16 15
0
G_End
Reserved
Reserved
The G_End command ends one primitive. The G_Vertex command must be specified between the
G_Begin or G_BeginCont command and G_End command.
MB86294/294S CORAL_LB
Graphics Controller
108
Specifications Rev. 1.0