MC9S08DZ60CLH Datasheet, PDF (99/416 Pages) Freescale Semiconductor, Inc – MC9S08DZ60 Series Features

6.5.3.3 Port C Pull Enable Register (PTCPE)
Chapter 6 Parallel Input/Output Control
R
W
Reset:
7
PTCPE7
0
6
PTCPE6
5
PTCPE5
4
PTCPE4
3
PTCPE3
2
PTCPE2
1
PTCPE1
0
0
0
0
0
0
Figure 6-21. Internal Pull Enable for Port C Register (PTCPE)
Table 6-19. PTCPE Register Field Descriptions
0
PTCPE0
0
Field
Description
7:0
PTCPE[7:0]
Internal Pull Enable for Port C Bits — Each of these control bits determines if the internal pull-up device is
enabled for the associated PTC pin. For port C pins that are configured as outputs, these bits have no effect and
the internal pull devices are disabled.
0 Internal pull-up device disabled for port C bit n.
1 Internal pull-up device enabled for port C bit n.
NOTE
Pull-down devices only apply when using pin interrupt functions, when
corresponding edge select and pin select functions are configured.
6.5.3.4 Port C Slew Rate Enable Register (PTCSE)
R
W
Reset:
7
PTCSE7
0
6
PTCSE6
5
PTCSE5
4
PTCSE4
3
PTCSE3
2
PTCSE2
1
PTCSE1
0
0
0
0
0
0
Figure 6-22. Slew Rate Enable for Port C Register (PTCSE)
Table 6-20. PTCSE Register Field Descriptions
0
PTCSE0
0
Field
Description
7:0
PTCSE[7:0]
Output Slew Rate Enable for Port C Bits — Each of these control bits determines if the output slew rate control
is enabled for the associated PTC pin. For port C pins that are configured as inputs, these bits have no effect.
0 Output slew rate control disabled for port C bit n.
1 Output slew rate control enabled for port C bit n.
Note: Slew rate reset default values may differ between engineering samples and final production parts. Always initialize slew
rate control to the desired value to ensure correct operation.
MC9S08DZ60 Series Data Sheet, Rev. 4
Freescale Semiconductor
99