MC9S12UF32 Datasheet, PDF (72/128 Pages) Freescale Semiconductor, Inc – System on a Chip Guide V01.05

System on a Chip Guide — 9S12UF32DGV1/D V01.05
2.5.29 PQ6 / SDAT6 / CFA6 / SDCLK / IOC6 — Port Q I/O Pins 6
PQ4 is a general purpose input or output pin. This pin can be used as IOC6 of TIM_16B8 module, SDCLK
of SDHC module, CFA6 of CFHC module or SDAT6 of SMHC module. Refer to Table 2-2 for module
routing information. While in reset and immediately out of reset PQ6 pin is configured as high impedance
input. Consult the Port Integration Module (PIM) PIM_9UF32 Block Guide, the CFHC Block Guide, the
TIM_16B8C Block Guide, the SDHC Block Guide and the SMHC Block Guide for information about pin
configurations.
2.5.30 PQ5 / SDAT5 / CFA5 / SDCMD / IOC5 — Port Q I/O Pins 5
PQ4 is a general purpose input or output pin. This pin can be used as IOC5 of TIM_16B8 module, SDCMD
of SDHC module, CFA5 of CFHC module or SDAT5 of SMHC module. Refer to Table 2-2 for module
routing information. While in reset and immediately out of reset PQ5 pin is configured as high impedance
input. Consult the Port Integration Module (PIM) PIM_9UF32 Block Guide, the CFHC Block Guide, the
TIM_16B8C Block Guide, the SDHC Block Guide and the SMHC Block Guide for information about pin
configurations.
2.5.31 PQ4 / SDAT4 / CFA4 / ATADMACK / IOC4 — Port Q I/O Pins 4
PQ4 is a general purpose input or output pin. This pin can be used as IOC4 of TIM_16B8 module,
ATADMACK of ATA5HC module, CFA4 of CFHC module or SDAT4 of SMHC module. Refer to Table
2-2 for module routing information. While in reset and immediately out of reset PQ4 pin is configured as
high impedance input. Consult the Port Integration Module (PIM) PIM_9UF32 Block Guide, the CFHC
Block Guide, the TIM_16B8C Block Guide, the ATA5HC Block Guide and the SMHC Block Guide for
information about pin configurations.
2.5.32 PQ3 / SDAT3 / CFIORD / ATAIORD — Port Q I/O Pins 3
PQ3 is a general purpose input or output pin. This pin can be used as ATAIORD of ATA5HC module,
CFIORD of CFHC module or SDAT3 of SMHC module. Refer to Table 2-2 for module routing
information. While in reset and immediately out of reset PQ3 pin is configured as high impedance input.
Consult the Port Integration Module (PIM) PIM_9UF32 Block Guide, the CFHC Block Guide, the
ATA5HC Block Guide and the SMHC Block Guide for information about pin configurations.
2.5.33 PQ[2:0] / SDAT[2:0] / CFA[2:0] / ATADA[2:0]— Port Q I/O Pins [2:0]
PQ[2:0] are general purpose input or output pins. This pin can be used as ATADA[2:0] of ATA5HC
module, CFA[2:0] of CFHC module or SDAT[2:0] of SMHC module. Refer to Table 2-2 for module
routing information. While in reset and immediately out of reset PQ[2:0] pins are configured as high
impedance input pins. Consult the Port Integration Module (PIM) PIM_9UF32 Block Guide, the CFHC
Block Guide, the ATA5HC Block Guide and the SMHC Block Guide for information about pin
configurations.
72
Freescale Semiconductor