|
MC68HC908GR8 Datasheet, PDF (247/286 Pages) Freescale Semiconductor, Inc – M68HC08 Microcontrollers | |||
|
◁ |
Chapter 23
Electrical Specifications
23.1 Absolute Maximum Ratings
Maximum ratings are the extreme limits to which the microcontroller unit (MCU) can be exposed without
permanently damaging it.
NOTE
This device is not guaranteed to operate properly beyond the maximum
ratings. Refer to 5.0 V DC Electrical Characteristics for guaranteed
operating conditions.
Supply voltage
Characteristic(1)
Input voltage
Maximum current per pin excluding VDD, VSS, and PTC0âPTC1
Maximum current for pins PTC0âPTC1
Maximum current into VDD
Maximum current out of VSS
Storage temperature
1. Voltages referenced to VSS
Symbol
VDD
VIn
I
IPTC0âPTC1
Imvdd
Imvss
Tstg
Value
Unit
â0.3 to + 6.0
V
VSS â 0.3 to VDD + 0.3
V
± 15
mA
± 25
mA
150
mA
150
mA
â55 to +150
°C
NOTE
This device contains circuitry to protect the inputs against damage due to
high static voltages or electric fields; however, it is advised that normal
precautions be taken to avoid application of any voltage higher than
maximum-rated voltages to this high-impedance circuit. For proper
operation, it is recommended that VIn and VOut be constrained to the range
VSS ⤠(VIn or VOut) ⤠VDD. Reliability of operation is enhanced if unused
inputs are connected to an appropriate logic voltage level (for example,
either VSS or VDD).
MC68HC908GR8 ⢠MC68HC908GR4 Data Sheet, Rev. 7
Freescale Semiconductor
247
|
▷ |