MC68HC908GR8 Datasheet, PDF (125/286 Pages) Freescale Semiconductor, Inc – M68HC08 Microcontrollers

I/O Registers
MODEK — Keyboard Triggering Sensitivity Bit
This read/write bit controls the triggering sensitivity of the keyboard interrupt pins. Reset clears
MODEK.
1 = Keyboard interrupt requests on falling edges and low levels
0 = Keyboard interrupt requests on falling edges only
13.7.2 Keyboard Interrupt Enable Register
The keyboard interrupt enable register enables or disables each port A pin to operate as a keyboard
interrupt pin.
Address: $001B
Bit 7
6
5
4
3
2
1
Bit 0
Read: 0
0
0
0
KBIE3 KBIE2 KBIE1 KBIE0
Write:
Reset:
0
0
0
0
= Unimplemented
Figure 13-4. Keyboard Interrupt Enable Register (INTKBIER)
KBIE3–KBIE0 — Keyboard Interrupt Enable Bits
Each of these read/write bits enables the corresponding keyboard interrupt pin to latch interrupt
requests. Reset clears the keyboard interrupt enable register.
1 = PTAx pin enabled as keyboard interrupt pin
0 = PTAx pin not enabled as keyboard interrupt pin
MC68HC908GR8 • MC68HC908GR4 Data Sheet, Rev. 7
Freescale Semiconductor
125