|
MC68HC05X16 Datasheet, PDF (172/232 Pages) Freescale Semiconductor, Inc – High-density complementary metal oxide semiconductor HCMOS) microcontroller unit | |||
|
◁ |
Freescale Semiconductor, Inc.
14.1
EPROMS
For the MC68HC05X16, a 16K byte EPROM programmed with the customerâs software (positive
logic for address and data) should be submitted for pattern generation. All unused bytes should be
programmed to $00. The size of EPROM which should be used for all other family members is
listed in Table 14-2.
The EPROM should be clearly labelled, placed in a conductive IC carrier and securely packed.
Table 14-2 EPROMs for pattern generation
Device
MC68HC05X16
MC68HC05X32
Size of EPROM
16K byte
32K byte
14.2
Veriï¬cation media
All original pattern media (EPROMs) are ï¬led for contractual purposes and are not returned. A
computer listing of the ROM code will be generated and returned with a listing veriï¬cation form.
The listing should be thoroughly checked and the veriï¬cation form completed, signed and returned
to Motorola. The signed veriï¬cation form constitutes the contractual agreement for creation of the
custom mask. If desired, Motorola will program blank EPROMs (supplied by the customer) from
the data ï¬le used to create the custom mask, to aid in the veriï¬cation process.
14.3
ROM veriï¬cation units (RVU)
Ten MCUs containing the customerâs ROM pattern will be provided for program veriï¬cation. These
units will have been made using the custom mask but are for ROM veriï¬cation only. For
expediency, they are usually unmarked and are tested only at room temperature (25°C) and at
5 Volts. These RVUs are included in the mask charge and are not production parts. They are
neither backed nor guaranteed by Motorola Quality Assurance.
14
ORDERING INFORMATION
MC68HC05X16
For More Information On This Product,
Rev. 1
Go to: www.freescale.com
|
▷ |