MC68HC05X16 Datasheet, PDF (131/232 Pages) Freescale Semiconductor, Inc – High-density complementary metal oxide semiconductor HCMOS) microcontroller unit

Freescale Semiconductor, Inc.
9.2
A/D registers
9.2.1 Port D data register (PORTD)
Port D data (PORTD)
Address bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
State
on reset
$0003 PD7 PD6 PD5 PD4 PD3 PD2 PD1 PD0 Undefined
Port D is an input-only port which routes the eight analog inputs to the A/D converter. When the
A/D converter is disabled, the pins are configured as standard input-only port pins, which can be
read via the port D data register.
Note:
When the A/D function is enabled, pins PD0–PD7 will act as analog inputs. Using a pin
or pins as A/D inputs does not affect the ability to read port D as static inputs; however,
reading port D during an A/D conversion sequence may inject noise on the analog
inputs and result in reduced accuracy of the A/D result.
Performing a digital read of port D with levels other than V_DD or V_SS on the pins will
result in greater power dissipation during the read cycle, and may give unpredictable
results on the corresponding port D pins.
9.2.2 A/D result data register (ADDATA)
A/D data (ADDATA)
Address bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
State
on reset
9
$0008
0000 0000
ADDATA is a read-only register which is used to store the results of A/D conversions. Each result
is loaded into the register from the SAR and the conversion complete flag, COCO, in the ADSTAT
register is set.
MC68HC05X16
ANALOG TO DIGITAL CONVERTER
For More Information On This Product,
9-3
Go to: www.freescale.com