AMG-XB404 Datasheet, PDF (34/73 Pages) alpha microelectronics gmbh – Fully Integrated Single Motor Controller for Electrical Motors

AMG-XB404
Fully Integrated Single Motor Controller for Electrical Motors
Command Description
0x11 set address register
0x22 set buffer register [7:0] to value in data register
0x33 set buffer register [15:8] to value in data register
0x44 set buffer register [21:16] to value in data register
0x55 set data register to value in buffer register [7:0]
0x66 set data register to value in buffer register [15:8]
0x77 set data register to value in buffer register [21:16]
0x88 set buffer register [15:0] to PFC data RAM or register
0x99
set data from PFC data RAM or port to buffer register
[15:0]
0xAA set buffer register [21:0] to PFC program RAM
0xBB set data from PFC program RAM to buffer register [21:0]
0xCC enable PFC controller
0xDD disable PFC controller
0xEE set data register to value of the PFC program counter
Table 15: PFC bus interface command codes
AMG-XB404
Revision: A
2. Nov. 2012 © All rights reserved
Page 34 of 73