W90N745CD Datasheet, PDF (190/422 Pages) Winbond – 16/32-bit ARM microcontroller

W90N745CD/W90N745CDG
31
23
15
7
BITS
[31:24]
[23:13]
[12]
[11]
[10]
[9]
[8]
[7:0]
30
29
22
21
14
13
Reserved
6
5
28
27
POTPGT
20
19
Reserved
12
OCPM
11
OCPM
4
3
NDSP
26
18
10
DEVT
2
25
17
9
NPSW
1
24
16
8
PSWM
0
POTPGT
Reserved
NOCP
OCPM
DEVT
NPSW
PSWM
NDSP
DESCRIPTION
PowerOnToPowerGoodTime
This field value is represented as the number of 2 ms intervals, which ensuring
that the power switching is effective within 2 ms. Only bits [25:24] is implemented
as R/W. The remaining bits are read only as ‘0’. It is not expected that these bits
be written to anything other than 1h, but limited adjustment is provided. This field
should be written to support system implementation. This field should always be
written to a non-zero value.
Reserved. Read/Write 0's
NoOverCurrentProtection
Global over-current reporting implemented in HYDRA-2. This bit should be written
to support the external system port over-current implementation.
0 = Over-current status is reported
1 = Over-current status is not reported
OverCurrentProtectionMode
Global over-current reporting implemented in HYDRA-2. This bit should be written
0 and is only valid when NoOverCurrentProtection is cleared.
0 = Global Over-Current
1 = Individual Over-Current
DeviceType
table of none-4is not a compound device.
NoPowerSwitching
Global power switching implemented in HYDRA-2. This bit should be written to
support the external system port power switching implementation.
0 = Ports are power switched.
1 = Ports are always powered on.
PowerSwitchingMode
Global power switching mode implemented in HYDRA-2. This bit is only valid
when NoPowerSwitching is cleared. This bit should be written '0'.
0 = Global Switching
1 = Individual Switching
NumberDownstreamPorts
table of none-4 supports two downstream ports.
Publication Release Date: September 22, 2006
- 185 -
Revision A2