W90N745CD Datasheet, PDF (103/422 Pages) Winbond – 16/32-bit ARM microcontroller

W90N745CD/W90N745CDG
6.5.1.2. Tx Buffer Descriptor
33
10
11
65
3210
O
Reserved
I CP
Transmit Buffer Starting Address
BO
Tx Status
Transmit Byte Count
Next Tx Descriptor Starting Address
Tx Descriptor Word 0
31
Owner
23
15
7
30
29
22
21
14
13
6
5
Reserved
28
27
Reserved
20
19
Reserved
12
11
Reserved
4
3
26
18
10
2
IntEn
25
24
17
16
9
8
1
CRCApp
0
PadEn
Owner [31]: Ownership
The ownership field defines which one, the CPU or EMC, is the owner of each Tx descriptor. Only the
owner has right to modify the Tx descriptor and the other can read the Tx descriptor only.
0: The owner is CPU
1: The owner is EMC
If the O=1’b1 indicates the EMC TxDMA is the owner of Tx descriptor and the Tx descriptor is
available for frame transmission. After the frame transmission completed, EMC TxDMA modify
ownership field to 1’b0 and return the ownership of Tx descriptor to CPU.
If the O=1’b0 indicates the CPU is the owner of Tx descriptor. After the CPU prepares new frame to
wait transmission, it modifies the ownership field to 1’b1 and releases the Tx descriptor to EMC
TxDMA.
IntEn [2]: Transmit Interrupt Enable
The IntEn controls the interrupt trigger circuit after the frame transmission completed. If the IntEn is
enabled, the EMC will trigger interrupt after frame transmission completed. Otherwise, the interrupt
doesn’t be triggered.
1’b0: Frame transmission interrupt is masked.
1’b1: Frame transmission interrupt is enabled.
- 98 -