English
Language : 

LM3S5D56 Datasheet, PDF (978/1146 Pages) Texas Instruments – Stellaris® LM3S5D56 Microcontroller
Pulse Width Modulator (PWM)
Register 8: PWM Interrupt Status and Clear (PWMISC), offset 0x01C
This register provides a summary of the interrupt status of the individual PWM generator blocks. If
a fault interrupt is set, the corresponding FAULTn input has caused an interrupt. For the fault interrupt,
a write of 1 to that bit position clears the latched interrupt status. If an block interrupt bit is set, the
corresponding generator block is asserting an interrupt. The individual interrupt status registers,
PWMnISC, in each block must be consulted to determine the reason for the interrupt and used to
clear the interrupt.
PWM Interrupt Status and Clear (PWMISC)
PWM0 base: 0x4002.8000
Offset 0x01C
Type R/W1C, reset 0x0000.0000
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
reserved
INTFAULT3 INTFAULT2 INTFAULT1 INTFAULT0
Type RO
RO
RO
RO
RO
RO
RO
RO
RO
RO
RO
RO R/W1C R/W1C R/W1C R/W1C
Reset
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
reserved
INTPWM2 INTPWM1 INTPWM0
Type RO
RO
RO
RO
RO
RO
RO
RO
RO
RO
RO
RO
RO
RO
RO
RO
Reset
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit/Field
31:20
19
18
Name
reserved
INTFAULT3
INTFAULT2
Type
RO
R/W1C
R/W1C
Reset
0x000
0
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
FAULT3 Interrupt Asserted
Value Description
1 An enabled interrupt for the fault condition for PWM generator
3 is asserted or is latched.
0 The fault condition for PWM generator 3 has not been asserted
or is not enabled.
Writing a 1 to this bit clears it and the INTFAULT3 bit in the PWMRIS
register.
FAULT2 Interrupt Asserted
Value Description
1 An enabled interrupt for the fault condition for PWM generator
2 is asserted or is latched.
0 The fault condition for PWM generator 2 has not been asserted
or is not enabled.
Writing a 1 to this bit clears it and the INTFAULT2 bit in the PWMRIS
register.
978
January 23, 2012
Texas Instruments-Production Data