MSP430FR5729 Datasheet, PDF (25/115 Pages) Texas Instruments – MSP430FR572x Mixed-Signal Microcontrollers

www.ti.com
MSP430FR5729, MSP430FR5728, MSP430FR5727, MSP430FR5726, MSP430FR5725
MSP430FR5724, MSP430FR5723, MSP430FR5722, MSP430FR5721, MSP430FR5720
SLASE35A – MAY 2014 – REVISED JUNE 2014
5.17 PMM, Core Voltage
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN TYP
V_CORE(AM)
Core voltage, active mode
2 V ≤ DV_CC ≤ 3.6 V
1.5
V_CORE(LPM)
Core voltage, low-current mode
2 V ≤ DV_CC ≤ 3.6 V
1.5
MAX
UNIT
V
V
5.18 PMM, SVS, BOR
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP
I_SVSH,AM
I_SVSH,LPM
V_SVSH-
V_SVSH+
t_{PD,SVSH, AM}
t_{PD,SVSH, LPM}
I_SVSL
V_SVSL–
V_SVSL+
SVS_H current consumption, active mode
SVS_H current consumption, low power modes
SVS_H on voltage level, falling supply voltage
SVS_H off voltage level, rising supply voltage
SVS_H propagation delay, active mode
SVS_H propagation delay, low power modes
SVS_L current consumption
SVS_L on voltage level
SVS_L off voltage level
V_CC = 3.6 V
V_CC = 3.6 V
dV_CC/dt = 10 mV/µs
dV_CC/dt = 1 mV/µs
5
0.8
1.83
1.88
1.88
1.93
10
30
0.3
1.42
1.47
MAX UNIT
µA
1.5 µA
1.93 V
1.98 V
µs
µs
0.5 µA
V
V
5.19 Wake-Up from Low Power Modes
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
t_{WAKE-UP LPM0}
PARAMETER
Wake-up time from LPM0 to active
mode ⁽¹⁾
TEST CONDITIONS
V_CC
T_A
2 V, 3 V
-40°C to 85°C
MIN TYP MAX UNIT
0.58
1 µs
t_{WAKE-UP LPM12}
Wake-up time from LPM1, LPM2 to
active mode ⁽¹⁾
2 V, 3 V
-40°C to 85°C
12
25 µs
t_{WAKE-UP LPM34}
Wake-up time from LPM3 or LPM4 to
active mode ⁽¹⁾
2 V, 3 V
-40°C to 85°C
78 120 µs
t_{WAKE-UP LPMx.5}
Wake-up time from LPM3.5 or
LPM4.5 to active mode ⁽¹⁾
2 V, 3 V
0°C to 85°C
2 V, 3 V
-40°C to 85°C
310 575 µs
310 1100 µs
t_{WAKE-UP RESET}
Wake-up time from RST to active
mode ⁽²⁾
V_CC stable
2 V, 3 V
-40°C to 85°C
230 280 µs
t_{WAKE-UP BOR}
Wake-up time from BOR or power-up
to active mode
dV_CC/dt = 2400 V/s
2 V, 3 V
-40°C to 85°C
1.6
ms
t_RESET
Pulse duration required at RST/NMI
terminal to accept a reset event⁽³⁾
2 V, 3 V
-40°C to 85°C
4
ns
(1) The wake-up time is measured from the edge of an external wake-up signal (for example, port interrupt or wake-up event) until the first
instruction of the user program is executed.
(2) The wake-up time is measured from the rising edge of the RST signal until the first instruction of the user program is executed.
(3) Meeting or exceeding this time makes sures a reset event occurs. Pulses shorter than this minimum time may or may not cause a reset
event to occur.
Copyright © 2014, Texas Instruments Incorporated
Specifications
25
Submit Documentation Feedback
Product Folder Links: MSP430FR5729 MSP430FR5728 MSP430FR5727 MSP430FR5726 MSP430FR5725
MSP430FR5724 MSP430FR5723 MSP430FR5722 MSP430FR5721 MSP430FR5720