MSP430FR5729 Datasheet, PDF (17/115 Pages) Texas Instruments – MSP430FR572x Mixed-Signal Microcontrollers

www.ti.com
MSP430FR5729, MSP430FR5728, MSP430FR5727, MSP430FR5726, MSP430FR5725
MSP430FR5724, MSP430FR5723, MSP430FR5722, MSP430FR5721, MSP430FR5720
SLASE35A – MAY 2014 – REVISED JUNE 2014
5.6 Schmitt-Trigger Inputs – General Purpose I/O
(P1.0 to P1.7, P2.0 to P2.7, P3.0 to P3.7, P4.0 to P4.1, PJ.0 to PJ.5, RST/NMI)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
V_IT+ Positive-going input threshold voltage
TEST CONDITIONS
V_CC
MIN TYP
2V
0.80
3V
1.50
V_IT– Negative-going input threshold voltage
2V
0.45
3V
0.75
V_hys Input voltage hysteresis (V_IT+ – V_IT–)
2V
0.25
3V
0.30
R_Pull
C_I
Pullup or pulldown resistor
Input capacitance
For pullup: V_IN = V_SS
For pulldown: V_IN = V_CC
V_IN = V_SS or V_CC
20
35
5
MAX
1.40
2.10
1.10
1.65
0.8
1.0
UNIT
V
V
V
50 kΩ
pF
5.7 Inputs – Ports P1 and P2 ⁽¹⁾
(P1.0 to P1.7, P2.0 to P2.7)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
t_(int)
External interrupt timing ⁽²⁾
TEST CONDITIONS
External trigger pulse duration to set interrupt flag
V_CC
2 V, 3 V
MIN MAX UNIT
20
ns
(1) Some devices may contain additional ports with interrupts. See the block diagram and terminal function descriptions.
(2) An external signal sets the interrupt flag every time the minimum interrupt pulse duration t_(int) is met. It may be set by trigger signals
shorter than t_(int).
5.8 Leakage Current – General Purpose I/O
(P1.0 to P1.7, P2.0 to P2.7, P3.0 to P3.7, P4.0 to P4.1, PJ.0 to PJ.5, RST/NMI)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
I_lkg(Px.x)
PARAMETER
High-impedance leakage current
TEST CONDITIONS
(1) (2)
V_CC
2 V, 3 V
MIN MAX UNIT
-50
50 nA
(1) The leakage current is measured with V_SS or V_CC applied to the corresponding pin(s), unless otherwise noted.
(2) The leakage of the digital port pins is measured individually. The port pin is selected for input and the pullup/pulldown resistor is
disabled.
Copyright © 2014, Texas Instruments Incorporated
Specifications
17
Submit Documentation Feedback
Product Folder Links: MSP430FR5729 MSP430FR5728 MSP430FR5727 MSP430FR5726 MSP430FR5725
MSP430FR5724 MSP430FR5723 MSP430FR5722 MSP430FR5721 MSP430FR5720