SI5341_16 Datasheet, PDF (33/53 Pages) Silicon Laboratories – Low-Jitter, 10 or 4-Output, Any-Frequency, Any-Output Clock Generator

Si5341/40 Rev D Data Sheet
Electrical Specifications
Table 5.14. Absolute Maximum Ratings^{1, 2, 3, 4}
Parameter
Symbol
Test Condition
Value
Units
Storage Temperature Range
T_STG
-55 to +150
°C
DC Supply Voltage
V_DD
-0.5 to 3.8
V
V_DDA
-0.5 to 3.8
V
V_DDO5
-0.5 to 3.8
V
Input Voltage Range
V_I1
IN0-IN2, FB_IN
-0.85 to 3.8
V
V_I2
IN_SEL[1:0], RSTb, OEb,
-0.5 to 3.8
V
SYNCb, I2C_SEL, SDI, SCLK,
A0/CSb, A1, SDA/SDIO, FINC/
FDEC
V_I3
XA/XB
-0.5 to 2.7
V
Latch-up Tolerance
LU
JESD78 Compliant
ESD Tolerance
HBM
100 pF, 1.5 kΩ
2.0
kV
Maximum Junction Temperature in Operation
T_JCT
125
°C
Soldering Temperature (Pb-free profile)⁵
T_PEAK
260
°C
Soldering Temperature Time at T_PEAK
T_P
20 to 40
sec
(Pb-free profile)⁵
Notes:
1. Permanent device damage may occur if the absolute maximum ratings are exceeded. Functional operation should be restricted to
the conditions as specified in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for ex-
tended periods may affect device reliability.
2. 64-QFN and 44-QFN packages are RoHS-6 compliant.
3. Moisture sensitivity level is MSL2. For more packaging information, go to the Silicon Labs RoHS information page.
4. The minimum voltage at these pins can be as low as –1.0 V when an AC input signal of 10 MHz or greater is applied. See Table
5.3 Input Clock Specifications on page 20 spec for single-ended AC-coupled f_IN < 250 MHz.
5. The device is compliant with JEDEC J-STD-020.
silabs.com | Smart. Connected. Energy-friendly.
Rev. 1.0 | 32