C8051F980-C-GM Datasheet, PDF (186/325 Pages) Silicon Laboratories – Ultra Low Power, 8-2 kB Flash, Capacitive Sensing MCU

C8051F99x-C8051F98x
18.8. SmaRTClock (Real Time Clock) Reset
The SmaRTClock can generate a system reset on two events: SmaRTClock Oscillator Fail or
SmaRTClock Alarm. The SmaRTClock Oscillator Fail event occurs when the SmaRTClock Missing Clock
Detector is enabled and the SmaRTClock clock is below approximately 20 kHz. A SmaRTClock alarm
event occurs when the SmaRTClock Alarm is enabled and the SmaRTClock timer value matches the
ALARMn registers. The SmaRTClock can be configured as a reset source by writing a 1 to the RTC0RE
flag (RSTSRC.7). The SmaRTClock reset remains functional even when the device is in the low power
Suspend or Sleep mode. The state of the RST pin is unaffected by this reset.
18.9. Software Reset
Software may force a reset by writing a 1 to the SWRSF bit (RSTSRC.4). The SWRSF bit will read 1
following a software forced reset. The state of the RST pin is unaffected by this reset.
186
Rev. 1.2