GS2961A Datasheet, PDF (100/104 Pages) Gennum Corporation – Ancillary data extraction

6. References & Relevant Standards
SMPTE 125M
SMPTE 259M
SMPTE 260M
SMPTE 267M
SMPTE 272M
SMPTE 274M
SMPTE 291M
SMPTE 292M
SMPTE 293M
SMPTE 296M
SMPTE 299M
SMPTE 305M
SMPTE 348M
SMPTE 352M
SMPTE 372M
SMPTE 424M
SMPTE 425M
SMPTE RP165
SMPTE RP168
CEA 861
Component video signal 4:2:2 – bit parallel interface
10-bit 4:2:2 Component and 4fsc Composite Digital Signals - Serial Digital
Interface
1125 / 60 high definition production system – digital representation and
bit parallel interface
Bit parallel digital interface – component video signal 4:2:2 16 x 9 aspect
ratio
Formatting AES/EBU Audio and Auxiliary Data into Digital Video Ancillary
Data Space
1920 x 1080 scanning analog and parallel digital interfaces for multiple
picture rates
Ancillary Data Packet and Space Formatting
Bit-Serial Digital Interface for High-Definition Television Systems
720 x 483 active line at 59.94Hz progressive scan production – digital
representation
1280 x 720 scanning, analog and digital representation and analog
interface
24-Bit Digital Audio Format for HDTV Bit-Serial Interface
Serial Data Transport Interface
High Data-Rate Serial Data Transport Interface (HD-SDTI)
Video Payload Identification for Digital Television Interfaces
Dual Link 292M Interface for 1920 x 1080 Picture Raster
Television - 3Gb/s Signal/Data Serial Interface
Television - 3Gb/s Signal/Data Serial Interface - Source Image Format
Mapping
Error Detection Checkwords and Status Flags for Use in Bit-Serial Digital
Interfaces for Television
Definition of Vertical Interval Switching Point for Synchronous Video
Switching
Video Timing Requirements
GS2961A 3Gb/s, HD, SD SDI Integrated Receiver
Data Sheet
54385 - 2
September 2012
100 of 104