HN29V1G91T-30 Datasheet, PDF (41/92 Pages) Renesas Technology Corp – 128M X 8-bit AG-AND Flash Memory

HN29V1G91T-30
Reset operation
This device can enter standby mode interrupting each operation mode by writing FFh command (reset
command) during each operation. Page address data during program operation, block data during erase
operation are not guaranteed after completing reset operation.
Reset operation in the Cache program (R/B = Ready, True R/B = Busy)
I/O
80h
15h
R/B
FFh
tRSTP
Reset operation in the Cache program (R/B = Ready, True R/B = Busy)
I/O
80h
15h
R/B
RES
tRSTP
tRSTP min
Reset operation in the Erase Verify
I/O
60h
R/B
D2h/D3h
FFh
tRSTEV
Reset operation in the Erase Verify
I/O
60h
R/B
RES
D2h/D3h
tRSTEV
tRSTEV min
Rev.4.00, Jun.20.2004, page 41 of 89