GR442QR7LB102KW01L Datasheet, PDF (35/237 Pages) Murata Manufacturing Co., Ltd. – chip monolithic ceramic capacitors

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Oct.1,2012
Continued from the preceding page.
Temperature
Characteristic Codes
Temperature Characteristics
Code
Public
Reference Temperature ^{Capacitance Change}
or Temperature
STD Code Temperature Range
Coefficient
Operating
Temperature
Range
R1
R *1 JIS 20°C –55 to 125°C
±15%
–55 to 125°C
R3
R JIS 20°C –55 to 125°C
±15%
–55 to 125°C
R6
X5R EIA 25°C
–55 to 85°C
±15%
–55 to 85°C
R7
X7R EIA 25°C –55 to 125°C
±15%
–55 to 125°C
R8
R *1 JIS 20°C
–25 to 85°C
±15%
–25 to 85°C
R9
X8R EIA 25°C –55 to 150°C
±15%
–55 to 150°C
±10% *3
W0
-
*2
25°C –55 to 125°C
–55 to 125°C
+22%, –33% *4
*1 Capacitance change is specified with 50% rated voltage applied.
*2 Murata Temperature Characteristic Code.
*3 Apply DC350V bias.
*4 No DC bias.
Capacitance Change Each Temperature (%)
–55°C
Max. Min.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
–25°C
Max. Min.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
–10°C
Max. Min.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
yRated Voltage
Code
0E
0G
0J
1A
1C
1E
YA
1H
2A
2D
2E
YD
2W
2H
2J
3A
3D
3F
BB
E2
GC
GF
GD
GB
Rated Voltage
DC2.5V
DC4V
DC6.3V
DC10V
DC16V
DC25V
DC35V
DC50V
DC100V
DC200V
DC250V
DC300V
DC450V
DC500V
DC630V
DC1kV
DC2kV
DC3.15kV
DC350V (for Camera Flash Circuit)
AC250V
X1/Y2; AC250V (Safety Standard Certified Type GC)
Y2, X1/Y2; AC250V (Safety Standard Certified Type GF)
Y3; AC250V (Safety Standard Certified Type GD)
X2; AC250V (Safety Standard Certified Type GB)
uCapacitance
Expressed by three-digit alphanumerics. The unit is picofarad
(pF). The first and second figures are significant digits, and the
third figure expresses the number of zeros which follow the two
numbers. If there is a decimal point, it is expressed by the capital
letter "R." In this case, all figures are significant digits.
If any alphabet, other than "R", is included, this indicates the
specific part number is a non-standard part.
Ex.)
Code
R50
1R0
100
103
Capacitance
0.5pF
1.0pF
10pF
10000pF
iCapacitance Tolerance
Code
B
C
D
F
G
J
K
M
N
R
W
X
Y
Z
Capacitance Tolerance
±0.1pF
±0.25pF
±0.5pF (10pF and below)
±0.5% (10pF and over)
±1%
±2%
±5%
±10%
±20%
±30%
Depends on individual standards.
±0.05pF
Depends on individual standards.
Depends on individual standards.
+80/–20%
oIndividual Specification Code (Except LLR)
Expressed by three figures.
oESR (LLR Only)
Code
E01
E03
E05
E07
!0Packaging
Code
L
D
E
K
J
F
B
C
T
ESR
100mΩ
220mΩ
470mΩ
1000mΩ
Packaging
ø180mm Embossed Taping
ø180mm Paper Taping
ø180mm Paper Taping (LLL15)
ø330mm Embossed Taping
ø330mm Paper Taping
ø330mm Paper Taping (LLL15)
Bulk
Bulk Case
Bulk Tray
Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog.
17