GR442QR7LB102KW01L Datasheet, PDF (190/237 Pages) Murata Manufacturing Co., Ltd. – chip monolithic ceramic capacitors

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Oct.1,2012
GA2 Series Specifications and Test Methods
Continued from the preceding page.
No.
Ìi“
-«iVˆvˆV>̈œ˜Ã
/iÃÌÊi̅œ`

««i>À>˜Vi No marking defects
>«>VˆÌ>˜ViÊ
Փˆ`ˆÌÞÊ <sup>…>˜}i</sup>
Within ±15%
17 ­-Ìi>`ÞÊ D.F.
0.05 max.
Ê-Ì>Ìi® _I.R.
More than 1,000MΩ
ˆiiVÌÀˆVÊ
-ÌÀi˜}̅
In accordance with item No.4
Let the capacitor sit at 40±2°C and relative humidity of 90 to 95%
for 500Y ^{W20 4}hrs.
Remove and let sit for 24±2 hrs. at room condition,* then
measure.
U*ÀiÌÀi>̓i˜Ì
Perform a heat treatment at 150Y ^W10 ⁰°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
18 ˆvi

««i>À>˜Vi No marking defects
>«>VˆÌ>˜ViÊ
…>˜}i
Within ±20%
D.F.
0.05 max.
I.R.
More than 1,000MΩ
Apply voltage and time as in Table at maximum operating
temperature ±3°C. Remove and let sit for 24±2 hrs. at room
condition,* then measure. The charge / discharge current is
less than 50mA.
œ“ˆ˜>Ê >«>VˆÌ>˜Vi /iÃÌÊ/ˆ“i /iÃÌÊ6œÌ>}i
CU10,000pF
1,000Y ^W480 hrs. AC300V (r.m.s.)
CF10,000pF
1,500Y ^{W40 8} hrs. AC500V (r.m.s.) ^*
ˆiiVÌÀˆVÊ
-ÌÀi˜}̅
In accordance with item No.4
* Except that once each hour the voltage is increased to
AC1,000V (r.m.s.) for 0.1 sec.
U*ÀiÌÀi>̓i˜Ì
Apply test voltage for 60±5 min. at test temperature.
Remove and let sit for 24±2 hrs. at room condition.*

««i>À>˜Vi No marking defects
>«>VˆÌ>˜ViÊ
…>˜}i
Within ±15%
19
Փˆ`ˆÌÞ
œ>`ˆ˜}
D.F.
0.05 max.
I.R.
More than 1,000MΩ
ˆiiVÌÀˆVÊ
-ÌÀi˜}̅
In accordance with item No.4
Apply the rated voltage at 40±2°C and relative humidity of 90 to
95% for 500Y ^{W20 4}hrs.
Remove and let sit for 24±2 hrs. at room condition,* then
measure.
U*ÀiÌÀi>̓i˜Ì
Apply test voltage for 60±5 min. at test temperature.
Remove and let sit for 24±2 hrs. at room condition.*
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
172